Tested the Z-Wave USNAP module for 3M-50 thermostat and does link with almond+.
Change the setting is instead.
Current have the wifi and z-wave connected to the thermostat and both can control the settings.
You can control the temp but does not update the current temp inside the house. The sliders need to have a value instead a dot or triangle where you see what temp is been set.
The web interface "
https://connect.securifi.com/home" or login to router with the IP address and the Display of the router does not update the current temp.
Almond+ , web and display shows 77 degree, but thermostat show 73 degree.