Cannot access Web UI

[erikvandermey]

This is what I get when I try to access the Web UI:

/usr/lib/lua/luci/dispatcher.lua:211: /etc/config/luci seems to be corrupt, unable to find section 'main'
stack traceback:
   [C]: in function 'assert'
   /usr/lib/lua/luci/dispatcher.lua:211: in function 'dispatch'
   /usr/lib/lua/luci/dispatcher.lua:195: in function </usr/lib/lua/luci/dispatcher.lua:194>

[pete]

Welcome to the Securifi forum Erik.

Relating to your concern; try a cold boot/reset and reconfiguration of your Almond + pushing the little white button on the top of the device.

Let us know what happens eh?

[erikvandermey]

Was able to access the Web UI after resetting via the little white button. Updated with the new firmware. All is good now.

[reedog117]

This is what I get when I try to access the Web UI:

/usr/lib/lua/luci/dispatcher.lua:211: /etc/config/luci seems to be corrupt, unable to find section 'main'
stack traceback:
   [C]: in function 'assert'
   /usr/lib/lua/luci/dispatcher.lua:211: in function 'dispatch'
   /usr/lib/lua/luci/dispatcher.lua:195: in function </usr/lib/lua/luci/dispatcher.lua:194>

I had the same issue with a new, straight-out-of-the-box Almond+ that I received Monday 8/11 when trying to access the Web UI after initial setup.  I had to do a full reset (~8 sec push of the reset button on top) to get the Web UI to show up.

[superbilou]

hello

i can't access to  web admin UI

i try to connect to the ip of almond+. For me it's 192.168.0.14.

i write this address in web browser but i have nothing.

i reboot with reset button but no change.

on the LCD ui in web admin screen i have the ip 10.10.10.254 but it's not my ip . what is this ip ?

[LGNilsson]

10.10.10.254 is the defauly IP address of the Almond+ and unless you've changed it, it'll remain the default IP address of the Almond+.

[superbilou]

i know my error.

My home network are connected on an french internet box (all in one : internet+rooter+nas+...). All computer have an address by this rooter   . and almond+ too

But the webui is on almond+ network. it's not the same.
I'm connected a computer by wifi on almond+ wifi and now my computer is on the almond+ network.
I can see the web ui interface.

[Cotesy]

I have the same problem as you. Have you found something?

Thanks, Sly.