0 Members and 1 Guest are viewing this topic.
That is vary telling information. The Fortrezz dry contact switch I have pairs as a siren. This makes sense as the product ID it is not on the list but the manufacturer id is the same, so it must default to what is on the list, a siren. I know other people on the forum are also seeing similar issues when they pair something that the product ID is not specified it gives them a option between the devices in the listHave you tried editing the file? I would be curious to see if my theory was right.manufacturer_specific.xml <Manufacturer id="0084" name="FortrezZ"> <Product type="0311" id="0109" name="SSA1 / SSA2 - Siren/Strobe Light Alarm"/> <Product type="0311" id="010b" name="SSA1 / SSA2 - Siren/Strobe Light Alarm"/> <Product type="0313" id="010b" name="SSA2USR - Siren/Strobe Light Alarm"/>From the Fortrezz documentation:Manufacturer ID 0x0084Product Type ID 0x0453 (US) 0x0451 (EU)Generic Device Class GENERIC_TYPE_SWITCH_BINARYSpecific Device Class SPECIFIC_TYPE_NOT_USED
I actually don't have any sensors yet, was going to go pick up a couple zwave plugs from HD tomorrow to test with. I've been focusing on trying to shoehorn in the Iris sensors. In theory though, it should work, if it's actually consulting that file. It appears that file just came originally from the link i posted in my post as well. Zigbee, seems to be another story though.
Page created in 0.076 seconds with 21 queries.