The LCD doesn't respond to any touches. Almond+ with firmware R065. LCD timeout set to 240 seconds.
Symptoms:
1. Unable to wake LCD by touching it or using the stylus.
2. Reboot via remote web page. Wait for LCD buttons to appear. Touch one every 5-10 seconds for 4-5 minutes. Alternate touching "More", "Status" and "Wireless", alternate stylus and fingertip taps.
3. Screen shows a lock icon, despite recent taps. Screen repaints slowly, changing colors slightly then goes black.
4. Repeat steps 1-3 this time rebooting by removing power from Almond+ for 60 seconds.
Feedback or suggestions are needed, especially since some options can only be set or read via LCD.
