bottleneck
Choose style:

Author Topic: Connected users  (Read 5188 times)

0 Members and 1 Guest are viewing this topic.

Offline ccstinger

  • Newbie
  • Posts: 1
  • Thanks: 0
  • Registered : 29/09/2013
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Connected users
« on: September 29, 2013, 11:59:19 am »
I use the web-based interface to manage my router.  I see from the interface that 35 devices are connected to my router - however when I do a scan of the devices on my network I only see about 15 devices connected.  It looks like the dhcp server has assigned about 30 numbers.  Is there a way to enable MAC address filtering - i.e. only allow devices with certain MAC addresses to connect to the router?

thanks!
Han

Offline Patrick Wilson

  • Cashew
  • ****
  • Posts: 220
  • Thanks: 0
  • Registered : 21/07/2013
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Connected users
« Reply #1 on: September 30, 2013, 02:04:11 am »
I use the web-based interface to manage my router.  I see from the interface that 35 devices are connected to my router - however when I do a scan of the devices on my network I only see about 15 devices connected.  It looks like the dhcp server has assigned about 30 numbers.  Is there a way to enable MAC address filtering - i.e. only allow devices with certain MAC addresses to connect to the router?

thanks!
Han

Absolutely!  Simply access the WebUI on the Router,  and scroll down to Advanced Settings.



Click on the Filtering tile.  The Mac/IP/Port Filtering screen will appear.



(The maximum rule count is 32.)

« Last Edit: September 30, 2013, 02:16:43 am by Patrick Wilson »
Patrick Wilson
Victoria, BC Canada

 

Page created in 0.065 seconds with 21 queries.