Just wanted to say that I went out and bought an A19 and a BR30 wink bulbs and both are working great in both dimming and on/off. Incidentally, apparently my area doesn't have a lot of folks playing with this because there were absolutely full displays of both the A19 and BR30 bulbs at my local home depot (looks like that's the only place selling them as far as I can tell). I did run into a couple of pairing issues, but eventually found how to reset the bulbs and re-paired them. The short of it is this:
//////
Turn the light fixture off, wait 3 solid seconds.
Turn the light fixture on, wait 3 solid seconds.
Turn the light fixture off, wait 3 solid seconds.
Turn the light fixture on, wait 3 solid seconds.
Repeat this 5 or 6 times until the light dims automatically and shoots back on to full brightness quickly. The bulb is now factory reset and can be re-paired.
//////
*edit* ***DARN, I totally didn't check the wiki, but this information is already there:
http://wiki.securifi.com/index.php?title=GE/Wink_Link_bulbs***
Also, I found that the bulbs do lose connectivity for a short time if switched on and off rapidly 3 or 4 times (was messing with my wife
), but the connection comes back relatively quickly without having to re-pair.