bottleneck
Choose style:

Author Topic: Wanted to buy - AU/NZ/HK version of Almond+  (Read 4447 times)

0 Members and 1 Guest are viewing this topic.

Offline ache

  • Peanut
  • **
  • Posts: 17
  • Thanks: 0
  • Registered : 29/04/2014
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Wanted to buy - AU/NZ/HK version of Almond+
« on: November 11, 2014, 12:29:49 am »
Hi all - I'm looking for an AU/NZ/HK version of the Almond+ (with the 921.42 MHz freq), so if anyone's looking to off-load their unit, please let me know.

I had previously started a topic in the General Discussion section, but never got any takers:
http://forum.securifi.com/index.php/topic,999.0.html

I've also looked on eBay etc, but no luck.

Mods - apologies if I'm not allowed to post this here, please let me know if this is the case.

Thanks.

LGNilsson

  • Guest
Re: Wanted to buy - AU/NZ/HK version of Almond+
« Reply #1 on: November 11, 2014, 03:20:15 am »
Just a heads up, HK is 919.8MHz...

Offline ache

  • Peanut
  • **
  • Posts: 17
  • Thanks: 0
  • Registered : 29/04/2014
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Wanted to buy - AU/NZ/HK version of Almond+
« Reply #2 on: November 11, 2014, 03:42:22 am »
Just a heads up, HK is 919.8MHz...

Thanks for pointing that out.

I should have been more precise in my wording. My understanding is that the AU/NZ/HK version of the Almond+ comes with both the 919.82 MHz frequency (for HK) and the 921.42 MHz frequency (for AU/NZ). I'm located in Australia, so am really after the latter frequency.

Let me know if I'm mistaken.

LGNilsson

  • Guest
Re: Wanted to buy - AU/NZ/HK version of Almond+
« Reply #3 on: November 11, 2014, 03:44:08 am »
No, HK is on a different frequency, the ones that are the same are AU/NZ and Brazil, please see - http://z-wave.sigmadesigns.com/docs/Z-Wave_Frequency_Coverage.pdf

Offline ache

  • Peanut
  • **
  • Posts: 17
  • Thanks: 0
  • Registered : 29/04/2014
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Wanted to buy - AU/NZ/HK version of Almond+
« Reply #4 on: November 11, 2014, 03:51:11 am »
No, HK is on a different frequency, the ones that are the same are AU/NZ and Brazil, please see - http://z-wave.sigmadesigns.com/docs/Z-Wave_Frequency_Coverage.pdf

Yes, I understand that HK has a different frequency to AU/NZ - I was just trying to say that I was under the impression that all 3 countries get the same version of the Almond+, which can do either 919.82 or 921.42 as required.

Offline Foxy

  • Backer
  • *
  • Posts: 1
  • Thanks: 0
  • Registered : 11/11/2014
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Wanted to buy - AU/NZ/HK version of Almond+
« Reply #5 on: November 11, 2014, 10:41:32 pm »
I have one if you are interested. I'm located in Tasmania.
Are you in Australia?

 

Page created in 0.046 seconds with 17 queries.