Fibaro motion sensor support?

[andersos]

That's great @Ashok, thanks!!

So maybe it should be added to https://wiki.securifi.com/index.php/List_of_compatible_sensors_-_Almond%2B_2014

The accelerometer isn't supported yet?

[SecureComp]

That's great @Ashok, thanks!!

So maybe it should be added to https://wiki.securifi.com/index.php/List_of_compatible_sensors_-_Almond%2B_2014

The accelerometer isn't supported yet?

Added to Wiki

[Chiqui1973]

I ordered 6 Fibaro Motion Sensors and they arrived with the 3.2V software, they are not working with Almond+ running R83, is there a firmare update on the way? Seems the ZWave Plus sensors are having issues with the current versión.

[Ashok]

@ Chiqui1973,

So far, we don't have any known issues with the Fibaro Motion sensor, please do send us the log files and let us know, what exactly is the issue you are facing.

[Chiqui1973]

First I installed it as a multisensor but the motion sensor was not working, tried to do a re install but it gets stucked in the middle of the process, I have an older Fibaro sensor working fine. The temp and Lux seemed to work fine. Also tried to do a reset of the sensor but no luck so far and removed it a couple of times.

Regarding the log, i´m not sure how to extrac ti from the router but I can find out.

[Ashok]

@ Chiqui1973,

You can send the logs through Almond+ touch screen, Help->Send logs.

[Chiqui1973]

Thanks for the tip, logs sent....

[andersos]

So with the recent firmware update, maybe the sensors list on the wiki should be added to. With the newer Fibaro motion sensor, does Almond+ now see the accelerometer of the motion sensor too?

[mastuder]

I just got the Fibaro FGMS-001 and it connected once but will not connect again.  The Almond+ says it found a sensor but does not connect and just times out.  The Fibaro goes to blue and then the led goes off, I assume it times out also.  And when it was connected the Almond+ would not read any information.  Any suggestions?