Choose style:

Author Topic: Almond 3 Firmware AL3-R014 is out  (Read 3667 times)

0 Members and 1 Guest are viewing this topic.

Offline Ashok

  • Securifi Staff
  • *
  • Posts: 2770
  • Thanks: 3
  • Registered : 25/07/2014
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Almond 3 Firmware AL3-R014 is out
« on: December 13, 2016, 09:08:26 am »
Almond 3 Firmware AL3-R14 is out, which can be updated via LCD UI and App. Ensure that we update the firmware on the Primary unit first under Mesh setup and that would take care of the other units and need to wait for few minutes. Please find the release notes below:

--> Mesh master mode with slave Web UI bug fixes.

--> Option to keep same settings for 2.4 and 5 GHz.

--> Static IP reservation limit increased to 20.

--> If we send logs from Primary, it would send logs of secondary and third unit as well.

--> 2.4 GHz SSID would be set as Almond name (For all the units in Mesh setup). Location name is different than device name and whatever we select/customize while running the setup that would be the location and not the name of the device and name would be 2.4 GHz SSID.

--> Guest SSID would be enabled on 2nd and 3rd unit, once it is enabled on Primary under Mesh setup.

--> Added support for Climax Smoke sensor and Climax remote control.

--> Bug fixes.

Note: If the Firmware is not updating directly via LCD UI then please try running the diagnostics app (Help-->Diagnostics) and try again. If it still fails then please do click here to download and update the firmware via Web UI.

 

Page created in 0.059 seconds with 17 queries.