Any feedback related to R089

[greendew]

@Ashok, any thoughts on this.  I'm experiencing a similar situation.  Though mine is around 5-6 days this last time around.  It reaches a point where the 2.4 ssid shows as available but is never able to connect.

Not sure if this was for the 2.4 or 5, but I notice it when I switch back and forth to check for any errors in logs.  This was in the kernel log I believe when connecting through 2.4.

 Recevied an assoc frame from 00:xx:xx:xx:xx:xx
wmi_unified_event_rx : no registered event handler : event id 0x901b
FWLOG: [52855081] RATE: ChainMask 7, phymode 6, ni_flags 0x00223006, vht_mcs_set 0x0000, ht_mcs_set 0xffffff, legacy_rate_set 0x326813d
FWLOG: [52855101] WAL_DBGID_SECURITY_UCAST_KEY_SET ( 0x0 )
FWLOG: [52855101] WAL_DBGID_SECURITY_ENCR_EN (  )
FWLOG: [52855101] WAL_DBGID_SECURITY_ALLOW_DATA ( 0x436514 )
FWLOG: [52855154] WAL_DBGID_TX_BA_SETUP ( 0x436514, 0x0, 0x0, 0x40, 0x1 )
FWLOG: [52855154] WAL_DBGID_TX_BA_SETUP ( 0x436514, 0x6, 0x2, 0x40, 0x1 )
FWLOG: [52855154] RATE: ChainMask 7, phymode 6, ni_flags 0x00223006, vht_mcs_set 0x0000, ht_mcs_set 0xffffff, legacy_rate_set 0x32681f5
FWLOG: [52855285] WAL_DBGID_TX_BA_SETUP ( 0x436514, 0x1, 0x0, 0x40, 0x1 )
FWLOG: [52855578] WAL_DBGID_TX_BA_SETUP ( 0x436514, 0x5, 0x0, 0x40, 0x1 )

@pitchdarkice....I tried to change the channel of 2.4 GHz to something else and it has worked much better since.  Perhaps give it a try.

[pitchdarkice]

@pitchdarkice....I tried to change the channel of 2.4 GHz to something else and it has worked much better since.  Perhaps give it a try.

Thanks, I'll give it a try.  Right now I had it on a scheduled reboot every day.  I'll set it to a channel.  If this is the case, then something is wrong with the auto function.

[Fire69]

I just noticed something weird.





Why does it show DHCP disabled on the main screen??

[Ashok]

@ Fire69,

Thanks, I'll give it a try.  Right now I had it on a scheduled reboot every day.  I'll set it to a channel.  If this is the case, then something is wrong with the auto function.

Please try to check this in "incognito mode" and also by clearing the cache, let us know.

[Fire69]

@ Fire69,

Please try to check this in "incognito mode" and also by clearing the cache, let us know.

Thanks,  that fixed it.