bottleneck
Home
Help
Login
Register
Choose style:
Securifi Community Forum
Securifi Products
Almond 3
Port forwarding need different Internal and external ports
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Port forwarding need different Internal and external ports (Read 5405 times)
0 Members and 1 Guest are viewing this topic.
ryan8382
Acorn
Posts: 5
Thanks: 0
Registered : 21/01/2017
Port forwarding need different Internal and external ports
«
on:
February 26, 2017, 09:06:49 am »
Just bought the Almond3 for the IoT security option. Noticed that you can't do a port forwarding rule that has different internal and external ports. Looks like you can only do a range. This is required setup for use on a Tablo. You have to portforward 21022 to 8887 and 21020 to 80.
Logged
fillibar
Backer
Posts: 2060
Thanks: 4
Registered : 02/08/2013
Re: Port forwarding need different Internal and external ports
«
Reply #1 on:
February 27, 2017, 09:48:48 am »
I have a Tablo also. Yes, at present the Almond 3 port forwarding does not allow for a different external port. I hope this is on the plan in the future.
Logged
Almond 3 mesh handling the home.
ryan8382
Acorn
Posts: 5
Thanks: 0
Registered : 21/01/2017
Re: Port forwarding need different Internal and external ports
«
Reply #2 on:
March 08, 2017, 10:21:27 am »
I'm selling my tablo but this should be there. Seems like a logical feature to me.
Logged
fillibar
Backer
Posts: 2060
Thanks: 4
Registered : 02/08/2013
Re: Port forwarding need different Internal and external ports
«
Reply #3 on:
March 09, 2017, 08:13:07 am »
The Almond+ has it. Just something the Almond 3 does not yet would be my estimate.
Logged
Almond 3 mesh handling the home.
CincyAL3
Newbie
Posts: 15
Thanks: 0
Registered : 03/01/2017
Re: Port forwarding need different Internal and external ports
«
Reply #4 on:
August 03, 2017, 08:54:54 pm »
This definitely should be added this is bread and butter router functionality and I'm very sad to see Almond 3 doesn't have it. I have several things on port 22 and port 443 running in my network and I'd much rather have a custom external port than change all my applications, some of which may be hard coded.
Logged
fillibar
Backer
Posts: 2060
Thanks: 4
Registered : 02/08/2013
Re: Port forwarding need different Internal and external ports
«
Reply #5 on:
August 03, 2017, 11:10:00 pm »
True. It is one I have been wanting although it would not help me much until DynDNS can be used again. Both things I miss from the Almond+.
Logged
Almond 3 mesh handling the home.
mparadis
Backer
Posts: 1765
Thanks: 3
Registered : 02/08/2013
Re: Port forwarding need different Internal and external ports
«
Reply #6 on:
August 17, 2017, 04:28:31 pm »
I keep expecting these things to get added soon as they are basic functionalities that were supported in earlier devices. I hope they do soon...
Logged
marcw
Newbie
Posts: 13
Thanks: 0
Registered : 29/07/2017
Re: Port forwarding need different Internal and external ports
«
Reply #7 on:
September 14, 2017, 09:08:51 pm »
This is one of the several reasons I use the Almonds as a mesh only, behind a more serious router (DrayTek Vigor 2830, soon to be updated to a 2860). The other is multi-NAT; I have a /29 static IP block and I have servers on different external IP addresses.
Logged
tom531
Newbie
Posts: 11
Thanks: 0
Registered : 23/11/2016
Re: Port forwarding need different Internal and external ports
«
Reply #8 on:
June 07, 2018, 01:25:43 pm »
Dear support,
Are we ever going to have Port forwarding with different Internal and external ports? I just got a TabloTV and was very surprise that Almond3 can't handle this.
Logged
Flyby
Newbie
Posts: 8
Thanks: 0
Registered : 28/11/2016
Re: Port forwarding need different Internal and external ports
«
Reply #9 on:
August 07, 2018, 08:02:00 am »
Just a bump on this one.
My security DVR need three ports open, internal/external/mobile. Using the Almond mobile app, setting the internal was no problem, it works. Where are the options to set up more than one port?
Any workarounds?
Logged
fillibar
Backer
Posts: 2060
Thanks: 4
Registered : 02/08/2013
Re: Port forwarding need different Internal and external ports
«
Reply #10 on:
August 07, 2018, 11:04:18 am »
Workaround to more than one port is to sets range that covers all needed ports.
I also would like multiple, individual ports, and different external ports (I also have a Tablo, and many different devices that make use of port 80 for example).
Logged
Almond 3 mesh handling the home.
Print
Pages: [
1
]
Go Up
« previous
next »
Securifi Community Forum
Securifi Products
Almond 3
Port forwarding need different Internal and external ports
Page created in 0.086 seconds with 22 queries.
bottleneck