I can add it to the list for user tested sensors.
Can you control the Blue LED? Meaning set the LED to be on or off for either switch position? It is a feature of that switch but I'm not sure of how the R76 will read the settings.
How is the switch reporting in the IOS App? The Android App? The Web Interface and the LCD?
Any issues with correct reporting of On/Off or Dimmer %?
Actually let me correct my statement. The GE 12722 pairs just fine with the Almond+ as a binary switch but here are some issues that I've found:
1. The LCD screen buttons for on/off can control the switch but the status of On or OFF is not accurate and can take time to update
2. Android app- for the switch, the app shows the same state as the LCD screen state for the switch. But because there isn't a specific On / OFF button on the app, when the power button is pressed the button doesn't seem to do anything. For instance- right now the LCD screen shows the switch as ON when it is actually OFF, so the android app shows ON and when I press the button on the app, it just says "updating sensor data. Please wait" and they reports "could not change, please wait".
3. Web interface shows the same state as LCD and lack of control as the android app. When the switch button is clicked on the web interface, a small notice of "Please refresh and retry".
FYI- Its not a dimmer switch. just on off.
The blue LED comes on only when switch is in the OFF state.
I do have rules setup for the switch (turn turn off during the day), but they were inactive when doing this testing. Have not tested the rules yet to see if they work.