bottleneck
Choose style:

Author Topic: Use of ip to rs485 and rs232 converter  (Read 2342 times)

0 Members and 1 Guest are viewing this topic.

Offline digitalhinge

  • Kickstarter Developer
  • *
  • Posts: 2
  • Thanks: 0
  • Registered : 25/07/2013
    YearsYearsYearsYearsYearsYearsYearsYearsYears
Use of ip to rs485 and rs232 converter
« on: April 29, 2014, 07:51:16 pm »
Hello everyone,

Some of the device still use rs485 or rs232.
I wonder if it is possible to program almond+ to send
Command string using a ip to serial convertor.

Roger

LGNilsson

  • Guest
Re: Use of ip to rs485 and rs232 converter
« Reply #1 on: April 29, 2014, 11:07:55 pm »
Not out of the box, no.
You might be able to coax OpenWRT into working, but it might require some work and I think your best bet would be a USB to serial adapter, unless the distance is too long - https://forum.openwrt.org/viewtopic.php?id=40841

I don't know how you'd talk to an IP to rs485/rs232 device, but technically it should work, as long as you can figure out how to get commands to/from OpenWRT to the IP to serial bridge.

 

Page created in 0.05 seconds with 18 queries.