Securifi Community Forum

Sensors and Home Automation => Home automation => Topic started by: djscoutmaster on July 17, 2014, 08:51:44 pm

Title: Schlage Door/Window TR Sensor RS100HC
Post by: djscoutmaster on July 17, 2014, 08:51:44 pm
This device would pair but wouldn't update to open/close. It would always say open

http://www.gokeyless.com/product/2061/schlage-rs100hc-nexia-door-window-sensor
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: LGNilsson on July 17, 2014, 09:01:09 pm
Quick question, what is it detected as?
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: djscoutmaster on July 17, 2014, 09:41:21 pm
detected as a door / window sensor. so the detection was correct
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: LGNilsson on July 17, 2014, 10:20:39 pm
That's interesting, ok, I'll have a chat with the Z-Wave team.
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: rouz42 on July 25, 2014, 10:12:55 am
Just a follow up, Im having the same problem. Device is outputing a change, the Almond+ screen refreshes when the signal is sent, but the status doesnt change. It also shows as unsupported on the Android app.
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: rouz42 on August 12, 2014, 10:25:04 am
New Android app shows the device as supported with a valid status but does not update/notify. Rebooting the app does not update status.
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: LGNilsson on August 12, 2014, 10:35:30 am
It's not an app issue. Somehow the sensor is behaving different from the 5-6 other brands of door sensors we've tested. We're going to order one in to get this fixed but it might take a little while.
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: rouz42 on August 12, 2014, 11:03:35 am
This is the same one that I am using which is white-branded Schlage.

http://www.amazon.com/Ecolink-Z-Wave-Door-Window-Sensor/dp/B00HPIYJWU/ref=sr_1_sc_1?ie=UTF8&qid=1407855773&sr=8-1-spell&keywords=eoclink+door+sensor
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: govee on August 12, 2014, 03:24:21 pm
Seems that A+ has this issue with any ecolink device. I sent LARS a log file of the activity. See the link below.

http://forum.securifi.com/index.php/topic,1365.0.html (http://forum.securifi.com/index.php/topic,1365.0.html)
Title: Re: Schlage Door/Window TR Sensor RS100HC
Post by: LGNilsson on August 12, 2014, 10:36:59 pm
We're getting some as the log files wasn't enough to explain why they don't change state.