Securifi Community Forum
Apps => iOS app => Topic started by: LGNilsson on November 29, 2014, 10:40:07 pm
-
After the malarky we had with the previous release of the iOS app, we've decided to take advantage of Apple's recently introduced beta program for iOS apps.
We'd like to get an active group of beta testers put together that are willing to test beta versions of app to make sure that we don't have any major bugs in it.
This means that there will be some expectations from your side to report any issues and we'd preferably have those of you that own at least a couple of sensors involved, be it ZigBee, Z-Wave or Hue lights.
You'll have direct access to our developers and as such you'll have a certain degree of influence on how the iOS app is being developed going forward.
If you're interested in joining the beta program, please reply to this thread. Invites will be limited, but we're looking for a fairly sizeable group.
-
Count me in. I have 2 of the motion sensors and the keyfob. I also have Hue lights, but I haven't paired them with my Almond+ yet.
EDIT: Forgot to mention I have an iPad 2, iPhone 4, iPhone 5, and iPhone 6 I can test from if needed.
-
I'd be interested but the only iOS device I have is my iPad as long as that is no problem. I have many z wave devices including switches, outlets, thermostat and a smoke/co alarm and several zigbee lights. I am currently using the almond+ in range extender mode.
-
Yes, please. I can test from a few devices (5s, 5, iPad) if that is helpful. Currently, I am only using some GE link lights, but I am planning on adding at least a thermostat and deadbolt shortly also. Thanks.
-
Sign me up, can test from iPhone 6 and iPad, possibly even iPhone 4.
I have a couple of binary switches, a working Vision motion/temperature sensor, and non-working vision door sensor.
-
I would like to join. I have:
1 Leviton VRMX1-1LZ Wall Switch
2 Ecolink Z-Wave PIR Motion Detectors
2 Levitron DZS15 Wall Switches
2 Link Bulbs
As far as devices I have an iPhone 6+; iPhone 5s; iPad Air2
-
Would like to join, too.
At the moment I am using a couple Fibaro wall plugs. There are plans of adding a smoke sensor and thermostats in the next 2-3 months.
Possible devices for testing:
- iPhone 4/5s/6
- iPad 3/4/Air
-
I'm interested, currently have 2 GE Link bulbs and an AC on/off switch, with plans to add some Hue lights as well as motion detectors and door switches.
e: iPhone 5, by the way.
-
Count me in I have an iPhone 6+, and an iPad Air. Right now I just have a z-wave light switch and outlet, working on getting additional devices.
-
Interested. I have some binary switches, light switches (with and with out dimmers), outlets with power monitor, motion detection and key fobs (though they aren't associated yet since I have no use until automation is working).
-
I'm willing to do this if you'll have me.
I have one binary switch, two dimmers and a multi sensor (movement, temerature, light but currently not supported).
I own an Iphone 6, an Ipad Air and an Ipad 2.
-
Im interested, I have a Iphone 4,4s,5,5s,6. Ipad Air ;).
-
Hello Lars,
I am willing to beta test the iOS apps.
I will be able to test a very large variety of Z-wave devices (currently own over 50), and am willing to test other devices as well.
Thanks.
-Robert
-
How on earth could I have missed this thread?
I´m in, with all kinds of Hue devices, keyfobs, thermostats and binary power switches
-
I would like to join the iOS app beta testers group. I have a couple of ZigBee sensors.
Best regards
Jose
-
I would be happy to be a part of this group!
I have iPhone 6, iPhone 5s, iPhone 5, iPhone 3GS (not compatible).
I have many Z-Wave Sensors (Including Secondary Controllers)
I have a few Zigbee Sensors (from Securifi)
I am a Computer Engineer, I write C# Services (with GUI Managers) and C++ (Boost) Libraries for embedded devices for a living.
-
No need to brag ;)
I've added all of you.
-
If it is possible, I'd like to be one of yours.
I'm using an iPhone 6.
I've some zigbee sensors and nest smoke detector ...
-
Cool, look forward to the invite e-mail!
-
I would like to be added. US Almond+, iPhone 5s, iPad and iPad Minis. I also have door sensors, fobs and motion sensor from Securifi, a couple GE lights and some light switches.
Thanks!
-Alan
-
Would love to be in the group. iPhone 6+, iPad mini and iPad Air, door sensors, motion sensors, fob from Securifi, plan to add more as the utility of the app becomes clear.
-
I would like to be added. EU Almond+, iPad, and Android smartphone (Nexus 5).
-
Huh, I saw on the Kickstarter site Lars telling someone to post here if they wanted to beta test the iOS app. I'm wondering if the beta test list is already closed. Has anyone heard from Securifi about this?
-
I've added all of you
-
If you're still looking, I have a bunch of hue lights, and iPhone 5s and iPad Air to test on.
-
please count me in.
I have a few iDevices and several securifi sensors and philips hue.
-
count me in. I have a few GE Link bulbs that are hooked up curently and am tinkering with getting Honeywell Wifi Thermostat and Craftsman AssureLink Garage Door linked as well.
-
I would definitely like to beta test.
I have the following installed:
2 z-wave thermostats
1 Schlage Deadbolt door lock
2 z-wave motion sensors
2 z-wave window sensors
-
I've added all of you.
-
Would like to throw my name in the mix.
2x Z-Wave Touch Screen Deadbolts
1x Z-Wave Keypad Deadbolt
2x Z-Wave Dimmable Outlet Plugs
1x Peanut Plug (thanks Securifi!)
2x Nest Thermostats (may be relevant after reading some of the other posts)
Using iPhone 6, 6+, iPad Air, iPad 2, and WebUI for control.
-
Done.
One more and I think we've had our fill of beta testers for now.
-
I would like to be a beta tester. I am currently using the A+ as a Range Extender and have 3 GE Link Light bulbs added.
-
You've already been added. Please see the app beta test forum.
-
The request for beta testers is now closed as we have a sufficient amount of testers.