Securifi Community Forum
Securifi Products => Almond 2015 => Topic started by: Ashok on August 11, 2016, 09:31:14 am
-
Please post any feedback related to R095 here.
-
Would have some... if it would install.
-
@ raydraon,
What is the issue you are facing while installing and did you try synchronizing the time and then do the update?
-
My Almond has decided to move all my wifi traffic to the subnet 192.168.30.x. The rest of my network is on 10.10.10.x This started right after the update. Wifi devices also don't show up under devices. I had to manually set the DNS on my chromebook to google as well because it does not look like DNS is working for wifi. There also does not appear to be away to set my town and the weather is showing for a city over 100km away, which makes the new weather rules pretty useless.
-
I was able to get wireless devices to join the correct subnet by setting static IP's
-
It has officially resolved it self and all my device have reconnected to the correct sub net. Almost like you fixed it somehow.
-
@Ashok So any word on being able to change the location for the weather features? It is driving me nuts that it shows the temp for a city over 100km away and across a channel of ocean?
-
My weather function is running just fine....the Time feature however is refusing to even start. Just brings me back to the menu.
-
It would be nice if we could get the weather and the time in the same screen.
-
My weather function is running just fine....the Time feature however is refusing to even start. Just brings me back to the menu.
After Updating and re-boot-
I have the same problem; reboot and clearing cache did nothing.
It says: "Starting Please wait do not unplug" and goes back to the menu screen.
After a short time on menu, the screen blacks out.Diagnostics show nothing wrong.
Maybe a re-load? Or a patch?
Weather seems to workfine though-- updating correct weather too!
Thanks!
Doc
-
;D
I can answer my own question..The Time needs to be re-sych'ed by using the Web UI and going into Settings and Time-.
Reset and apply and the Time App will now work.
No need to re-load latest Version Update(R095) by Web UI in Software and risking a bad Reload, or load the wrong file!
Hope this helps everyone else!
best Regards to all..
Doc
-
I am having the same problem with the time function.
Is there any guide on how to reset the time through the web ui function.
Can't seem to find any ?
Thanks
-
@ dev2smm,
I am having the same problem with the time function.
Is there any guide on how to reset the time through the web ui function.
Can't seem to find any ?
Thanks
Try to login to the Web UI-->Management-->Click on Sync with host and do not hit apply or anything, now tap on the Time App, let us know the status.
-
:o
After updating to R095 the Almond 2015 Status shows "internet disconnected".
I've tried AP (using ethernet cable in WAN port) and Extender mode (wirelessly), both return the same status.
I've tried putting the Almond into my router's DMZ, this also returned the same status.
I've tried setting a static IP for the Almond 2015 in my main router for both the Wifi MAC and WAN MAC addresses.
The WAN MAC gets an IP and shows up in the router, but still the internet is not accessible.
I've updated the time/date NTP with the "Sync with host" option and setting a different (time.apple.com) NTP server with a 1 hour NTP synchronization.
Current state:
1. I can connect via the Web GUI locally (with full functionality) from a browser
2. I can sort of connect via the Cloud using the iOS app (version 2.4.1 (6722)) - no message stating that the Almond needs an update, but it looks like all the Dashboard information is old/cached and non of the Devices are reachable/have a on-off toggle.
-
@ canman007,
Could we please try sequential power cycle of the main source connection and Almond one by one, let us know, if you are still facing the same issue.
-
@canman007 sounds like the DHCP server isn't issuing the IP address. This would be from the modem. I would try power cycling the modem and then the Almond 15. This should reset the connection.
-
@ dev2smm,
Try to login to the Web UI-->Management-->Click on Sync with host and do not hit apply or anything, now tap on the Time App, let us know the status.
This works; Web UI- Management -Time Sych; but you have to hit APPLY for it to allow the LCD UI Time to appear.
The time is not correct until the LCD UI is again synched for local time.
I found the bug that turns off the Weather and access to LCD Time Settings- !!
When the Weather is selected, then the LCD UI will not allow the Time to display or Settings accessed.
You have to go back to WEB UI; login to Admin( after switching Web UI wireless access to (WiFi-Router)-Almond Extension-if not already on Router-Almond Extension), and then as above Management-Time Synch WITH APPLY to reset the LCD UI access.
Hope this helps!
Doc