Securifi Community Forum
Securifi Products => Almond+ => Topic started by: govee on July 21, 2014, 10:03:56 pm
-
For some reason my wlan00 is not transmitting. It is not disabled. rted the rouI have restater. I tried checking the disable button and saving then unchecking and resaving to no avail. I have 3 AC devices and none see the network today.
-
Have you tried a hardware reset? http://wiki.securifi.com/index.php?title=Hardware_reset_button_-_Almond%2B_2014
Let me know if that works or not.
-
Reset worked. thanks
-
Please let us know if you have any other problems or if it happens again.
-
My 5GHz network doesn't appear either. It did when I first hooked the router up, then disappeared. I can get it to appear if I completely disable the 2.5GHz, but if I connect to it then I lose the connection pretty quickly. Hardware reset does nothing to resolve this.
Hopefully the issue will be resolved when the new firmware is released.
-
My 5GHz network doesn't appear either. It did when I first hooked the router up, then disappeared. I can get it to appear if I completely disable the 2.5GHz, but if I connect to it then I lose the connection pretty quickly. Hardware reset does nothing to resolve this.
Hopefully the issue will be resolved when the new firmware is released.
Feyd,
This happens on my phone also. I found that if the device you are trying to connect to the 5 ghz band has the 2.4 ghz band connected or even saved as a connection, the 5 ghz band no longer shows on the device at all until the 2.4 ghz settings are deleted and then the 5 ghz shows right away. It is not an ideal fix but one that I have found useful if your device supports both 5 and 2.4 ghz.
-
What devices have you guys seen this on and does the SSID have the same name for both networks?
-
Lars,
I am using booth an iPhone 5s and an iPad 3rd gen. Both SSID's are the same except for the last character is a 2 for the 2.4 band and a 5 for the 5 band. I cannot replicate this on my Mac Mini desktop PC. Per your question of the SSId's I tried changing the 2.4 band SSID to a completely different name and the issue persisted. I am going to send you a screen cap video of the issue in a PM so that it is easy to see what is happening at least on my device. I hope it helps figure out the issue. It is a very small file but it shows the issue replicated instead of trying to explain what happens.
Edit: I tried a quick test and if you search for "other" networks, you can find the 5 ghz band that way while connected to the 2.4 but it does not show as available in the wifi screen alone.