Securifi Community Forum
Sensors and Home Automation => Home automation => Topic started by: Petebitt on June 20, 2015, 04:46:17 pm
-
Have you been following this initiative? Indiegogo funded. It would be great if you could get them to add Almond+ to there list of compatible gateways. Figaro is already on their list, so does that imply that the Almond+ would also be compatible since it works with Fibaro sensor So?
-
The Project info:
https://www.indiegogo.com/projects/strips-the-invisible-window-and-door-sensor#/story
They are going for Z-Wave Alliance testing to be certified as Z-Wave compatible
http://z-wave.sigmadesigns.com/z-wave_plus
Currently working with a few control hubs:
https://www.webehome.com/Doc/WeBeHome_HG2_product_sheet.pdf
What Z-Wave gateways have you tested Strips with?
We are currently preparing Strips for Z-wave plus certification, http://z-wave.sigmadesigns.com/z-wave_plus, which is the Z-Wave Alliance's new certification program to secure compliance.
However, we are now also stepping up our efforts to verify the compliance towards common Z-Wave gateways on the market. So far we have verified Strips' compliance with the units in the list below, with more to follow.
•WeBeHome Gateway
•Fibaro Home Center 2
•Zipato Zipabox
•Vera (Vera 3; Vera Edge)
Command Classes Supported
What command classes are you using?
We are still in the development phase and the command classes are not final until we are finished with the product and certification process. But, the command classes we are using today are:
- COMMAND_CLASS_ZWAVEPLUS_INFO
- COMMAND_CLASS_VERSION
- COMMAND_CLASS_MANUFACTURER_SPECIFIC
- COMMAND_CLASS_ALARM
- COMMAND_CLASS_DEVICE_RESET_LOCALLY
- COMMAND_CLASS_SENSOR_BINARY
- COMMAND_CLASS_ASSOCIATION
- COMMAND_CLASS_ASSOCIATION_GRP_INFO
- COMMAND_CLASS_BATTERY
- COMMAND_CLASS_WAKE_UP
- COMMAND_CLASS_POWERLEVEL