Securifi Community Forum

Sensors and Home Automation => Home automation => Topic started by: bigstock2001 on January 10, 2016, 04:28:17 pm

Title: Help with a door lock
Post by: bigstock2001 on January 10, 2016, 04:28:17 pm

If anyone has used these deadbolts before I could use some help.  When I first got it I got it to connect with my almond+ I was able to lock the door but not unlock the door. I also could not get the door to unlock with the key pad.   could get it to lock though. so i removed it from my router and now I can't get it to connect to the router.   Is it suppose to be this way or did I just get a piece of junk.  any advice would be great.

thanks
http://www.monoprice.com/product?c_id=122&cp_id=12212&cs_id=1221201&p_id=10798&seq=1&format=2

Title: Re: Help with a door lock
Post by: Ashok on January 10, 2016, 04:38:48 pm

@ bigstock2001,

Try to tap on Add Sensor--> Remove (not remove all)--> Then follow the proper removal process on the door lock until you receive a message unknown sensor removed. Now ensure the door lock is less than 1 meter and try adding it again, if you are still facing issues with lock/unlock send the log files.

Title: Re: Help with a door lock
Post by: bigstock2001 on January 10, 2016, 04:51:48 pm

I currently can't even get it to reconnect to the router.  I think I should have just bout a kwikset lock seems like they are a little bit better than something that doesn't even have a company name on it

Title: Re: Help with a door lock
Post by: Ashok on January 10, 2016, 08:59:06 pm

@ bigstock2001,

The issue with the Z-wave devices is you have got to remove it properly from the network first before you add it, try to follow the steps which I provided I am positive once the removal process is followed properly, we can add it as normal.