Securifi Community Forum
Sensors and Home Automation => Home automation => Topic started by: umar on September 20, 2014, 12:21:19 pm
-
Hello i have tested the Everspring SE812 sirene it connects well with Almond Plus..when home automation feature available we can able to control with key fob :)
thanks
-
Thanx for the info. I bought the siren from the info i gather from you and yes it works well. but I have a two questions about this siren. Can I have a rechargeable battery in while the power from the plug adapter? Does your siren shows as "Battery Low" on Almond+?
-
It does report battery status, as for the second part, you'd have to contact Everspring.
-
Is there a way to make it work with my securifi sensors? I can only on or off the siren manually, but I don't know how to make work with the sensors even though after I used my Keyfob to arm the parameters, when I opened my doors it didnt set off the alarm.
-
It'll work once the automation is done. We're currently doing internal testing of the automation and we'll hopefully have something to share soon.
I also added it to the Wiki, as it seems like I'd forgotten about it.
-
Thanx for the info. I bought the siren from the info i gather from you and yes it works well. but I have a two questions about this siren. Can I have a rechargeable battery in while the power from the plug adapter? Does your siren shows as "Battery Low" on Almond+?
`
hi
yes it shows the battery status low i dont know if the battery is really low ..i will check with new battery .we need a 6v adaptateur if you want to use with sector ...and i dont know if it will recharge the rechargeable battery...
they said that if the current goes down the battery will took the relay..
thanks
-
@Lars
I found out the new firmware has the "IF" function, but my alarm is not listed in as the securifi sensors that I have.. Is there a way to do this?
-
@Lars
I found out the new firmware has the "IF" function, but my alarm is not listed in as the securifi sensors that I have.. Is there a way to do this?
hi update to latest firmware and it will show..i use the everspring se812 siren and it shows in automation ..
-
We've done some refinements to this for the next firmware and it's working fine in the rules now.