Securifi Community Forum

Securifi Products => Almond 3 => Topic started by: ggrair on July 26, 2017, 07:23:05 pm

Title: Almond 3 5G not showing
Post by: ggrair on July 26, 2017, 07:23:05 pm

Hi Everyone,


  With this unit, should I be seeing Almond and Almond 5G like most other routers when I search for wifi?


thanks
G

Title: Re: Almond 3 5G not showing
Post by: grouter on July 26, 2017, 08:29:45 pm

Yes, if your client device is capable. Does your 5.0 network have the same SSID as the 2.4 network? If so, you'll only see one on the client.

Title: Re: Almond 3 5G not showing
Post by: mparadis on July 27, 2017, 11:22:27 am

Default I believe is the same SSID for 5Ghz and 2.4Ghz on A3, you can change them if you want but won't get full "roaming" capability. If your SSID's are different, then in order to see them both you must be using a device that can connect via 5 and 2.4 (most new devices can). If you have a 2.4 only device, and the SSID's are the same, you will connect just to the 2.4 network automatically.