Securifi Community Forum

Sensors and Home Automation => Home automation => Topic started by: mparadis on January 11, 2015, 10:04:47 pm

Title: Sirens
Post by: mparadis on January 11, 2015, 10:04:47 pm: Now that we have rules coming into play. I'd love to see to a siren set up for use with an alarm system. The aeon labs seems like a good one at a reasonable price. http://www.amazon.com/Aeon-Labs-DSC11-ZWUS-indoors-ZW080-A17/dp/B00PKKM2HO/ref=sr_1_13?ie=UTF8&qid=1421030934&sr=8-13&keywords=aeon+labs

Is there are UI for sirens as of yet? Or will we be waiting for the UI to be developed first then see support for devices? Thanks!
Title: Re: Sirens
Post by: LGNilsson on January 12, 2015, 01:17:24 am: Met up with them at CES and they seem like a nice bunch of people. Got a few samples at the show and I'll be getting some more.
Haven't tried their siren, but we do have a basic UI for sirens, just not in the automation yet as far as I'm aware, but I'll see if I can't try it later this week.
Title: Re: Sirens
Post by: toppquality on January 21, 2015, 09:29:52 pm: Just tried to automate my siren. I have a siren up and running on the web and iPhone UI. It does not appear in the automation UI yet. Is there a time frame for the siren integration. Wanted to set it for activation when door opens. Thanks...
Title: Re: Sirens
Post by: LGNilsson on January 22, 2015, 01:33:49 am: It should be there in the next firmware.
Title: Re: Sirens
Post by: gomeznick on February 13, 2015, 10:43:13 am: Siren still is marked as unsupported (R70), and unavailable in the rules selection. So next firmware I take it?
Title: Re: Sirens
Post by: umar on February 14, 2015, 02:33:57 pm: hello

Mine also its connected with Almond plus but it does not shown in automation part ..Model is Everspring SE 812 ..i contacted scurf support and the securifi team is working on it..

thanks
Title: Re: Sirens
Post by: ombheembush on February 17, 2015, 02:46:49 am: Same here, my Utilitech Siren is connected to Almond+, I can turn in off and on but it doesn't show up in the Automation UI yet.
Title: Re: Sirens
Post by: LGNilsson on February 17, 2015, 03:53:00 am: It's expected in the next release.
Title: Re: Sirens
Post by: name no longer known on February 28, 2015, 12:09:03 am: Quote from: toppquality on January 21, 2015, 09:29:52 pm
Just tried to automate my siren. I have a siren up and running on the web and iPhone UI. It does not appear in the automation UI yet. Is there a time frame for the siren integration. Wanted to set it for activation when door opens. Thanks...

Were you able to setup the Aeon Labs ZW080-A17 (mparadis's link)?

I have that exact unit and am still unable to get it to pair with the Almond+.
Title: Re: Sirens
Post by: LGNilsson on March 01, 2015, 01:30:07 am: Not yet, I'll chase those guys once I'm back from MWC.
Title: Re: Sirens
Post by: umar on March 03, 2015, 03:51:01 pm: :) :)hello

My Everspring SE812 now shows in automation with the new firmware ;) ;)
Title: Re: Sirens
Post by: obmd1 on March 06, 2015, 07:23:50 pm: The siren shows up with a the as update, but I still must be doing something wrong. I am hooking to a flood detector. "If xyz flood" then "sound siren" but I am being told to "pick a trigger"

any idea?

Time should not be set, there is no set time constraint for this rule.
Title: Re: Sirens
Post by: obmd1 on March 06, 2015, 08:07:46 pm: In looking at the instructions, there doesn't seem to be an option in the "if" side of the rule to "confirm selections"

??
Title: Re: Sirens
Post by: umar on March 07, 2015, 08:59:15 am: hi

in my case i have created a rule like if key fob is armed and the door is open then turn on siren ..and if i press unlock button in key fob then it will deactivate my siren ..i activate when i leave the house and deactivate when i returns to home ..and it works fine ..i have a flood sensor too but not installed yet i will check ..

thanks
Title: Re: Sirens
Post by: mparadis on March 07, 2015, 09:12:03 am: At the bottom of the If section is a button that says confirm selection. You must select that after picking your triggers then select the actions add a name and save. Occasionally it'll get hung up, I just delete it and try again.
Title: Re: Sirens
Post by: umar on March 07, 2015, 09:42:37 am: (http://s30.postimg.org/9yluvxokt/Capture_d_cran_2015_03_07_15_30_26.jpg) (http://postimg.org/image/9yluvxokt/)

just created no problem...
Title: Re: Sirens
Post by: name no longer known on March 07, 2015, 10:47:41 am: I am still unable to pair my siren.
Title: Re: Sirens
Post by: obmd1 on March 07, 2015, 11:10:01 am: There is no button at the bottom of the if section to confirm the selection. ??
Title: Re: Sirens
Post by: obmd1 on March 07, 2015, 11:13:24 am: Interesting.....

does not work in safari browser.

works find in chrome.

noted.
Title: Re: Sirens
Post by: LGNilsson on March 07, 2015, 11:35:40 am: Quote from: bobbygeorgina on March 07, 2015, 10:47:41 am
I am still unable to pair my siren.

Make/model please?
Title: Re: Sirens
Post by: name no longer known on March 07, 2015, 06:41:40 pm: Quote from: Lars on March 07, 2015, 11:35:40 am
Make/model please?
Aeon Labs ZW080-A17
Title: Re: Sirens
Post by: LGNilsson on March 17, 2015, 07:11:06 am: That reminds me, I need to chase those guys for some samples.