Securifi Community Forum

Securifi Products => Almond 3 => Topic started by: syshi on May 13, 2017, 05:45:59 am

Title: A3 Mesh connection change
Post by: syshi on May 13, 2017, 05:45:59 am

Currently my A3 is connected as below
Fiber > modem > A3(1) > A3(2) & A3(1) > A3(3)
A3(1) to A3(2) & A3(3) through wireless. All mesh connection.
A3(1) to A3(3) is too weak, some barrier preventing the signal. Many times it dropped and showed as no connection or weak connection.

How can I change the connection if A3(3) to tap from A3(2) instead? Cause A3(2) is nearer and the intermediate connection.

Thanks for the advice

Title: Re: A3 Mesh connection change
Post by: Ashok on May 13, 2017, 09:58:52 am

@ syshi,

Quote from: syshi on May 13, 2017, 05:45:59 am

Currently my A3 is connected as below
Fiber > modem > A3(1) > A3(2) & A3(1) > A3(3)
A3(1) to A3(2) & A3(3) through wireless. All mesh connection.
A3(1) to A3(3) is too weak, some barrier preventing the signal. Many times it dropped and showed as no connection or weak connection.

How can I change the connection if A3(3) to tap from A3(2) instead? Cause A3(2) is nearer and the intermediate connection.

Thanks for the advice

Tap on Add Almond-->Check Wi-Fi status--> and remove the A3 (3) and then move it closer to A3(2) and try adding it back, that should do it.