Securifi Community Forum

Securifi Products => Almond 3 => Topic started by: ryan8382 on February 26, 2017, 09:06:49 am

Title: Port forwarding need different Internal and external ports
Post by: ryan8382 on February 26, 2017, 09:06:49 am

Just bought the Almond3 for the IoT security option. Noticed that you can't do a port forwarding rule that has different internal and external ports. Looks like you can only do a range. This is required setup for use on a Tablo. You have to portforward 21022 to 8887 and 21020 to 80.

Title: Re: Port forwarding need different Internal and external ports
Post by: fillibar on February 27, 2017, 09:48:48 am

I have a Tablo also. Yes, at present the Almond 3 port forwarding does not allow for a different external port. I hope this is on the plan in the future.

Title: Re: Port forwarding need different Internal and external ports
Post by: ryan8382 on March 08, 2017, 10:21:27 am

I'm selling my tablo but this should be there. Seems like a logical feature to me.

Title: Re: Port forwarding need different Internal and external ports
Post by: fillibar on March 09, 2017, 08:13:07 am

The Almond+ has it. Just something the Almond 3 does not yet would be my estimate.

Title: Re: Port forwarding need different Internal and external ports
Post by: CincyAL3 on August 03, 2017, 08:54:54 pm

 >:( This definitely should be added this is bread and butter router functionality and I'm very sad to see Almond 3 doesn't have it. I have several things on port 22 and port 443 running in my network and I'd much rather have a custom external port than change all my applications, some of which  may be hard coded.

Title: Re: Port forwarding need different Internal and external ports
Post by: fillibar on August 03, 2017, 11:10:00 pm

True. It is one I have been wanting although it would not help me much until DynDNS can be used again. Both things I miss from the Almond+.

Title: Re: Port forwarding need different Internal and external ports
Post by: mparadis on August 17, 2017, 04:28:31 pm

I keep expecting these things to get added soon as they are basic functionalities that were supported in earlier devices. I hope they do soon...

Title: Re: Port forwarding need different Internal and external ports
Post by: marcw on September 14, 2017, 09:08:51 pm

This is one of the several reasons I use the Almonds as a mesh only, behind a more serious router (DrayTek Vigor 2830, soon to be updated to a 2860).  The other is multi-NAT; I have a /29 static IP block and I have servers on different external IP addresses.

Title: Re: Port forwarding need different Internal and external ports
Post by: tom531 on June 07, 2018, 01:25:43 pm

Dear support,

Are we ever going to have Port forwarding with different Internal and external ports?  I just got a TabloTV and was very surprise that Almond3 can't handle this.

Title: Re: Port forwarding need different Internal and external ports
Post by: Flyby on August 07, 2018, 08:02:00 am

Just a bump on this one. 

My security DVR need three ports open, internal/external/mobile.  Using the Almond mobile app, setting the internal was no problem, it works.  Where are the options to set up more than one port?

Any workarounds?

Title: Re: Port forwarding need different Internal and external ports
Post by: fillibar on August 07, 2018, 11:04:18 am

Workaround to more than one port is to sets range that covers all needed ports.

I also would like multiple, individual ports, and different external ports (I also have a Tablo, and many different devices that make use of port 80 for example).