Securifi Community Forum
Securifi Products => Almond and Almond A1A => Topic started by: anubhav on May 03, 2014, 12:31:50 am
-
I'm was using my almond as an access point but yesterday, for some reason, it stopped working.
When I check the status, it says:
Mode: Access point
Cable disconnected
Internet: DHCP
The cable is connected to the grey port. I can connect the same cable to any other computer or NAS drive they can access the network. Do you have any suggestions on how I can fix this problem? It was working really well when it was.
I've tried:
1. Rebooting the device
2. Resetting the device
--Anubhav
-
As the cable seems working with other devices you may try this:
- You may check if you have a green light on the grey port of almond when you connect the cable between almond and your main router
- If it is not already done, you can also connect the main router to any device (computer for example) in order to see if there is no problem with that main router ports
- you can also check the software if you have AL1-R196 in the "About" icon of the last page of the LCD screen of almond
-
You might want to contact support at this point, as it seems like your Almond might've failed and they should be able to help you get a warranty replacement unit.
-
mine does the same thing.. How i fixed it was I called the customer service and asked for a refund and went and bought a new router from best buy..
-
I have fooled with this thing so many times to find this problem and I do have a fix/well bandaid for it but we do not have a way to write to the files needed. Their tech support says we cannot write to the files.. So saying that if you can figure out a way to write to the files you can email me and I will tell ya the fix but I am not going to post it because if they wont allow me to write the fix I am not going to give them the satisfaction of knowing the fix...