Securifi Community Forum
Sensors and Home Automation => Home automation => Topic started by: spooky123 on October 02, 2014, 07:45:58 am
-
Both of these are basic plug in lamp dimmer modules.
Both add to the Almond+ as unrecognized devices but can be controlled via GET/SET numeric values to turn on and off on the Almond+ touchscreen.
Both are unsupported in the Almond+ Android App and can't control them.
Just reporting the info. Looking forward to just basic support for these modules with basic time schedules.
-
That's really surprising, both are basic devices as you say and many other Z-Wave dimmers work just fine. Can you please remove and add them one at a time to the Almond+ and after you've add one, go to help and send logs in the LCD UI, put in the model name in the text entry box and we'll take a look.
-
Thanks and complete.
I removed both then added the Linear and sent the logs, then removed the linear and added the Leviton and sent the logs again.
-
I ran into the same thing with the Leviton DZPD3 (Dimmer) and Leviton DZPA1 (Appliance Module). Logs have been sent for these from my router as well.