Securifi Community Forum
Securifi Products => Almond 3 => Topic started by: ryan8382 on February 26, 2017, 09:06:49 am
-
Just bought the Almond3 for the IoT security option. Noticed that you can't do a port forwarding rule that has different internal and external ports. Looks like you can only do a range. This is required setup for use on a Tablo. You have to portforward 21022 to 8887 and 21020 to 80.
-
I have a Tablo also. Yes, at present the Almond 3 port forwarding does not allow for a different external port. I hope this is on the plan in the future.
-
I'm selling my tablo but this should be there. Seems like a logical feature to me.
-
The Almond+ has it. Just something the Almond 3 does not yet would be my estimate.
-
>:( This definitely should be added this is bread and butter router functionality and I'm very sad to see Almond 3 doesn't have it. I have several things on port 22 and port 443 running in my network and I'd much rather have a custom external port than change all my applications, some of which may be hard coded.
-
True. It is one I have been wanting although it would not help me much until DynDNS can be used again. Both things I miss from the Almond+.
-
I keep expecting these things to get added soon as they are basic functionalities that were supported in earlier devices. I hope they do soon...
-
This is one of the several reasons I use the Almonds as a mesh only, behind a more serious router (DrayTek Vigor 2830, soon to be updated to a 2860). The other is multi-NAT; I have a /29 static IP block and I have servers on different external IP addresses.
-
Dear support,
Are we ever going to have Port forwarding with different Internal and external ports? I just got a TabloTV and was very surprise that Almond3 can't handle this.
-
Just a bump on this one.
My security DVR need three ports open, internal/external/mobile. Using the Almond mobile app, setting the internal was no problem, it works. Where are the options to set up more than one port?
Any workarounds?
-
Workaround to more than one port is to sets range that covers all needed ports.
I also would like multiple, individual ports, and different external ports (I also have a Tablo, and many different devices that make use of port 80 for example).