Securifi Community Forum
Sensors and Home Automation => Home automation => Topic started by: djscoutmaster on July 17, 2014, 08:51:44 pm
-
This device would pair but wouldn't update to open/close. It would always say open
http://www.gokeyless.com/product/2061/schlage-rs100hc-nexia-door-window-sensor
-
Quick question, what is it detected as?
-
detected as a door / window sensor. so the detection was correct
-
That's interesting, ok, I'll have a chat with the Z-Wave team.
-
Just a follow up, Im having the same problem. Device is outputing a change, the Almond+ screen refreshes when the signal is sent, but the status doesnt change. It also shows as unsupported on the Android app.
-
New Android app shows the device as supported with a valid status but does not update/notify. Rebooting the app does not update status.
-
It's not an app issue. Somehow the sensor is behaving different from the 5-6 other brands of door sensors we've tested. We're going to order one in to get this fixed but it might take a little while.
-
This is the same one that I am using which is white-branded Schlage.
http://www.amazon.com/Ecolink-Z-Wave-Door-Window-Sensor/dp/B00HPIYJWU/ref=sr_1_sc_1?ie=UTF8&qid=1407855773&sr=8-1-spell&keywords=eoclink+door+sensor
-
Seems that A+ has this issue with any ecolink device. I sent LARS a log file of the activity. See the link below.
http://forum.securifi.com/index.php/topic,1365.0.html (http://forum.securifi.com/index.php/topic,1365.0.html)
-
We're getting some as the log files wasn't enough to explain why they don't change state.