Securifi Community Forum
Securifi Products => Almond 3 => Topic started by: Ashok on November 21, 2017, 08:25:25 am
-
Please post any feedback related to Almond 3 Firmware AL3-R022 here.
-
The iOS app changed when I installed this firmware update. Is the old "Home" now "Disarmed" and the old "Away" now "Armed"? The rules still say "home" and "away". I want to make sure my rules will continue to work.
-
Home = Disarmed
Away = Armed
That is how the new security module works it. Yes, the Rules still reference it the "old" way... But if you set up security methods (specifically setting a smartphone as a trigger for example) you are probably going to want to deactivate or remove old Rules that used to do all that, so they do not cause any odd conflicts.
-
Been updated for several hours and all seems solid, wife's iPad which was failing to migrate across the mesh seems to be much happier so far. :)
-
Using Almond 3 as AP. Everything was working fine before the update. Now rules for all of the lighting(16) have been very erratic!
-
Thanks for the help above! I do have another comment about this firmware. When the system goes armed, the A3 changes the screen to say that the system is armed. After that it changes back to the home screen, not the previous screen and then times out (if time out is set). So, if you use the clock screen, it will end up not being on the clock screen after arming the system. It would be nice if it went back to the clock screen after arming.
-
Makes sense to me that it should go back to the clock after arming. Does it return to the clock screen when the system disarms? In case it is trying for the "well, nobody is home anyways"... Just curious.
-
Yeah - I would agree that turning off the screen would make sense when it is armed. Unfortunately, the A3 screen does not return to the clock once the system is disarmed.
-
I am unable to use my sensors with the new Home Security option. My question does it only work with Securifi sensors? Once Professional Monitoring service is available will I be able to use non-Securifi sensors? Thank you.
-
I am unable to use my sensors with the new Home Security option. My question does it only work with Securifi sensors? Once Professional Monitoring service is available will I be able to use non-Securifi sensors? Thank you.
Are you unable to select your sensors during HOME SECURITY wizard?
From dashboard click on "HOME SECURITY" option and follow the wizard, it will ask you to select the sensors you want to monitor.
-
Hello Santosh,
I only see all of my Securifi sensors, but was unable to see non-securifi sensors. Both from home security wizard and by going to Settings/Home Security/Almond Alerts/
-
Adding to the early message.
The non-securifi sensors that I am using is make by Bosch, model ISW-ZPR1-WP13
-
Adding to the early message.
The non-securifi sensors that I am using is make by Bosch, model ISW-ZPR1-WP13
Is it added as generic device while adding?
-
Is it added as generic device while adding?
Yes, I believe it did added as a generic motion device.
-
I am getting double notification from my sensors. It occurs for both zwave and zigbee sensors. When a door is opened, I will get two open door notifications and when closed, I will get two closed notifications. I have tried powering down the A3 and have also removed the sensors and re-added them.