Securifi Community Forum
Sensors and Home Automation => Home automation => Topic started by: jonfl1 on August 18, 2014, 01:49:03 pm
-
I purchased a Leviton R02-DZR15-1LZ (http://www.homedepot.com/p/Leviton-Z-Wave-Enabled-15-Amp-Scene-Capable-Receptacle-with-LED-Locator-White-Ivory-Lite-Almond-R02-DZR15-1LZ/205298666) from my local home depot, and figured I would give it a try.
Once installed, the outlet was easily found and paired to the A+, but both the Android app and A+ itself show the device as unsupported. This despite the fact that I can successfully turn the outlet on and off via the A+ touch interface on the device's settings screen. (can provide screenshots if helpful)
Is there some way for me to fix this, since the device does work, or do I have to wait on the dev team to add support for the device in a future update?
-
If it works in the LCD UI, it's really trivial for us to add support in the mobile app and the web UI's, it'll just take a little bit of time as the local web UI only gets updated when there's a new firmware, the cloud UI gets updated slightly more frequently and the Android app (and soon the iOS app) are the two getting updated most frequently at the moment.
Can I ask that you go to Help, Send Log and send us a log once you've added the sensor to your Almond+. You'll see an option to add some text, please add the model name of the sensor there and we'll get it added to the other UI's.
-
I'll do that tonight after work. Thanks, Lars!
-
If it works in the LCD UI, it's really trivial for us to add support in the mobile app and the web UI's, it'll just take a little bit of time as the local web UI only gets updated when there's a new firmware, the cloud UI gets updated slightly more frequently and the Android app (and soon the iOS app) are the two getting updated most frequently at the moment.
Can I ask that you go to Help, Send Log and send us a log once you've added the sensor to your Almond+. You'll see an option to add some text, please add the model name of the sensor there and we'll get it added to the other UI's.
I was just going to buy one of these to test (since all I have is the Iris stuff I'm trying to shoehorn in). @Lars this device is zwave, so if what I asked you about is correct, then showing it supported will be easier. (I have some ideas)
-
Sent in the logs via the router UI this morning.
-
Still haven't seen this updated yet in either the web UI or the Android app. Can we expect this sometime soon?
-
It'll be in the next firmware.
-
Any word yet on this? Still haven't seen it implemented in the latest firmware.
-
Did you remove it and add it again after updating to the latest firmware?
We can't re-detect already added sensors, so they have to be removed and added again to be detected once we've added support for them.