Securifi Community Forum
Securifi Products => Almond+ => Topic started by: Deleted on September 13, 2014, 05:02:15 pm
-
Help! I was playing with adding sensors and I got into a bad state where the A+ could not detect any sensors on the web app or LCD. I reset the router to factory settings and the A+ still does not detect any of my sensors nor will it will not allow me to add/remove sensors AND THE ROUTER REBOOTS every 10 minutes or so.
I know doing a reset will not change the sensor settings. I believe I need to re-flash the firmware. Unfortunately, I need the root password (which was changed during the reset) to access the web interface. Worse, the LCD will not show the Web Status;only returning to the home screen and sometimes rebooting. All I see when the screen flashes is a random number of connected sensors.
I am sure this is all connected in some way. Is there a standard default password? Is there a way to turn off the automation until I can reflash things??? HELP!!!!
-
If you've done a hard reset, i.e. pressed and held the reset button for 10 seconds and it's still doing this, it seems like something has gone seriously wrong here.
Please email [suspicious]support@securifi.com[/suspicious] and we'll sort things out, as it looks like you might need a replacement.
-
Thanks; I will send an email with all the details