Securifi Community Forum

Securifi Products => Almond+ => Topic started by: LaVia on October 28, 2014, 05:59:58 am

Title: Unable to connect to Openwrt
Post by: LaVia on October 28, 2014, 05:59:58 am

Hi All

I hope someone can help. I have set the Almond+ up in range Extender mode but am unable to connect to openwrt from the web browser. I just get the page unable to connect error - so page wil not load.

What am I doing wrong ?

Thanks

Title: Re: Unable to connect to Openwrt
Post by: LGNilsson on October 28, 2014, 06:32:45 am

Which firmware are you using? This should be fixed in R066 afaik.
Worst case, OpenWRT can be found by adding :90 after the IP address of the router.

Title: Re: Unable to connect to Openwrt
Post by: LaVia on October 28, 2014, 06:42:08 am

Hi Lars

I am using R066 firmware. Adding :90 after the ip still does not work - error Unable to Connect.
I am able to access other menu options without problem.

Thanks

Title: Re: Unable to connect to Openwrt
Post by: LGNilsson on October 28, 2014, 07:25:03 am

Well, it's working perfectly for me, so the only thing I can suggest is to do a hard reset and see if that solves it, as it's possible that there's some leftovers from the firmware upgrade somehow causing issues and a reset will load a clean image from the flash.

Title: Re: Unable to connect to Openwrt
Post by: LaVia on October 28, 2014, 08:03:21 am

Hard Reset did not resolve it either. Bit frustrating...

Any other ideas.

Thanks

Title: Re: Unable to connect to Openwrt
Post by: LGNilsson on October 28, 2014, 09:49:49 am

Contact support? I'm out of options.