Securifi Community Forum

Sensors and Home Automation => Home automation => Topic started by: sattu on December 14, 2014, 12:08:25 am

Title: Existing Control4 ecosystem with Almond+?
Post by: sattu on December 14, 2014, 12:08:25 am

I've tried searching the forums and have a bad feeling about the answer already, but here goes.

I have a home fitted out with Control4 dimmers, switches and 3/6 button keypads - is there any way that these Zigbee devices can be added to and controlled by the Almond+ now or going forward? Basic reason is I need to decide prior to a home renovation whether I ditch the system completely now and go with all new sensors for the Almond+ or sink further into the Control4 quagmire.

Thanks in advance.

Title: Re: Existing Control4 ecosystem with Almond+?
Post by: LGNilsson on December 14, 2014, 12:51:20 am

Don't know is the short answer.

The slightly longer one is that we'd need to know what sensors/devices you have, as in specifics with regards to the model numbers and then we might be able to tell you.

Title: Re: Existing Control4 ecosystem with Almond+?
Post by: sattu on November 24, 2015, 02:40:09 pm

Sorry Lars, didn't check back in.

The main items are the Control4 dimmers (C4-DIM1-Z) - link here http://www.control4.com/files/dealers/documentation/200-00035_RevE_WirelessDimmer_C4-DIM1-Z_IG_Web.pdf

Hope this helps.

Title: Re: Existing Control4 ecosystem with Almond+?
Post by: SecureComp on November 24, 2015, 05:47:21 pm

Lars no longer works for Securifi but who knows, he may check back in.  8)

Contact Tech Support directly or perhaps @Ashok will check back in now that you have provided device specifics.

If you have an A+ already, go ahead and give the pairing a try.