Securifi Community Forum

Securifi Products => Almond+ => Topic started by: kristopher_d on January 22, 2015, 12:30:05 am

Title: Wired Hue Bridge not detected
Post by: kristopher_d on January 22, 2015, 12:30:05 am

My Hue Bridge is connected via the ethernet port.  My custom app and the Hue app from Phillips detect it just fine.  The Almond+, however, doesn't see the Hue Bridge in order to add it.

Title: Re: Wired Hue Bridge not detected
Post by: LGNilsson on January 22, 2015, 12:55:53 am

You might have to press the button on the Hue hub the first time you add it to the Almond+.

Title: Re: Wired Hue Bridge not detected
Post by: adx on January 28, 2015, 10:24:11 am

my hue hub was detected properly.
perhaps you can try power cycling your hub. and as lars pointed out, could just be the push button.

good luck!

Title: Re: Wired Hue Bridge not detected
Post by: kristopher_d on March 11, 2015, 09:34:56 pm

Several Power cycles of various devices in various orders:  No effect.

Move:  It works.  :/

Title: Re: Wired Hue Bridge not detected
Post by: LGNilsson on March 19, 2015, 05:34:34 am

We made a bunch of changes to how the hue stuff works in R070as, so this might be affecting it. I had some odd issues as well and the software team is looking at it.

Title: Re: Wired Hue Bridge not detected
Post by: Ohiomedic on March 19, 2015, 10:15:01 am

I got my hub yesterday, and had trouble pairing it also. When I clicked to add the hub, it would say searching for about 2 seconds before it would crash to the homepage. I tried a reboot which didn't fix it. I downgraded to r70, and it paired fine. Upon going back to r70as if I go back to the add hue, the right screen comes up like it should so I don't know what the problem was.

Title: Re: Wired Hue Bridge not detected
Post by: Baldo on April 01, 2015, 07:29:30 pm

HUE not pairing under under firmware 72. Just a quick flash and goes back to home screen.

Title: Re: Wired Hue Bridge not detected
Post by: Baldo on April 01, 2015, 08:19:39 pm

Had to roll back to 69cb to add hub then upgraded back to 72.

Title: Re: Wired Hue Bridge not detected
Post by: LGNilsson on April 01, 2015, 11:19:19 pm

I found that resetting the hue hub solved this issue for me. Pairing with and older firmware might not be ideal, as at one point during internal testing, things didn't work properly after that, but it's possible that they've fixed that.