Securifi Community Forum

Securifi Products => Almond+ => Topic started by: Paholainen on November 17, 2015, 10:23:17 am

Title: Fibaro motion sensor support?
Post by: Paholainen on November 17, 2015, 10:23:17 am: Any support planned for the Fibaro motion sensor? Thought it had support already but apparently not :(
Title: Re: Fibaro motion sensor support?
Post by: Ashok on November 17, 2015, 12:46:09 pm: @ Paholainen,

To my best knowledge, our next release would have support. Meanwhile, let me know what exactly happens and does it work through LCD UI?
Title: Re: Fibaro motion sensor support?
Post by: Paholainen on November 17, 2015, 03:04:53 pm: Thanks for the quick reply. Was almost ready to return it :). Yes, it works through LCD, but the APP says unsupported and doesn´t show anything, like the temp, humidity, motion. Those show up on the LCD
Title: Re: Fibaro motion sensor support?
Post by: Paholainen on November 17, 2015, 03:14:44 pm: Ok tried to put some rules on it, but it says unsupported on the web UI (or whatever it´s called) and doesn´t show up on rules page. So for now I have a temerature sensor only ;) Humidity shows zero, so suppose theres no support for that either atm. The motion sensor seems to work, it alerts on the LCD UI.
Title: Re: Fibaro motion sensor support?
Post by: obmd1 on November 17, 2015, 03:23:17 pm: Quote from: Paholainen on November 17, 2015, 03:04:53 pm
Thanks for the quick reply. Was almost ready to return it :). Yes, it works through LCD, but the APP says unsupported and doesn´t show anything, like the temp, humidity, motion. Those show up on the LCD

You're new here so I have to speak to help. Be careful waiting on updates for new device support. Look closely at the return policy for your device. The "next update" is as big a promise as "it's only a cold sore"
Title: Re: Fibaro motion sensor support?
Post by: Paholainen on November 17, 2015, 03:30:59 pm: Not so new ;), also waiting for the big update...
Forgot to put that the Luminance is not showing anything either
Title: Re: Fibaro motion sensor support?
Post by: Paholainen on November 17, 2015, 03:32:31 pm: Quote from: obmd1 on November 17, 2015, 03:23:17 pm
You're new here so I have to speak to help. Be careful waiting on updates for new device support. Look closely at the return policy for your device. The "next update" is as big a promise as "it's only a cold sore"
If there´s no update soon, I will buy the Fibaro control unit and a separate router
Title: Re: Fibaro motion sensor support?
Post by: obmd1 on November 17, 2015, 03:32:45 pm: Quote from: Paholainen on November 17, 2015, 03:30:59 pm
Not so new ;),r

Lars? Is that you?!

:)
Title: Re: Fibaro motion sensor support?
Post by: umar on November 17, 2015, 03:38:15 pm: Quote from: Paholainen on November 17, 2015, 10:23:17 am
Any support planned for the Fibaro motion sensor? Thought it had support already but apparently not :(

have a fibaro motion sensor too ...motion sensor works perfectly but not other options like temperature and light sensor
waiting for the next update too...the good thing about fibaro is it detect motion continuously ...not like securifi motion sensor.... detects motion and one sec later it says no motion...

thanks
Title: Re: Fibaro motion sensor support?
Post by: Paholainen on November 17, 2015, 04:42:45 pm: Quote from: obmd1 on November 17, 2015, 03:32:45 pm
Lars? Is that you?!

:)

Wish it was :)

Now the sensor shows Luminence in LCD.
Title: Re: Fibaro motion sensor support?
Post by: umar on November 17, 2015, 06:41:50 pm: Quote from: Paholainen on November 17, 2015, 04:42:45 pm
Wish it was :)

Now the sensor shows Luminence in LCD.

Hi motion should work properly when you choose as normal motion sensor ...mine works perfectly as motion detector in automation also...

Thanks
Title: Re: Fibaro motion sensor support?
Post by: Paholainen on November 18, 2015, 05:08:42 am: Quote from: umar on November 17, 2015, 06:41:50 pm
Hi motion should work properly when you choose as normal motion sensor ...mine works perfectly as motion detector in automation also...

Thanks

Thanks will try it.
Title: Re: Fibaro motion sensor support?
Post by: Paholainen on November 18, 2015, 09:05:15 am: Quote from: Paholainen on November 18, 2015, 05:08:42 am
Thanks will try it.

Works now with the Rules for motion detected an turning on a lamp. Hope the new update arrives before end of year (as I like the router) or I will change to Fibaros own control box.
Title: Re: Fibaro motion sensor support?
Post by: andersos on February 25, 2016, 02:55:51 am: So is this motion sensor now fully supported on Almond+ after "the big update"?
Title: Re: Fibaro motion sensor support?
Post by: Ashok on February 25, 2016, 07:14:17 am: @ andersos,

We added full support (Motion, Luminance, Temperature) for the following Fibaro Motion sensor and we have to select it as Multi sensor while adding.

http://www.fibaro.com/en/the-fibaro-system/motion-sensor
Title: Re: Fibaro motion sensor support?
Post by: andersos on February 26, 2016, 03:06:32 am: That's great @Ashok, thanks!!

So maybe it should be added to https://wiki.securifi.com/index.php/List_of_compatible_sensors_-_Almond%2B_2014

The accelerometer isn't supported yet?
Title: Re: Fibaro motion sensor support?
Post by: SecureComp on February 26, 2016, 02:16:07 pm: Quote from: andersos on February 26, 2016, 03:06:32 am
That's great @Ashok, thanks!!

So maybe it should be added to https://wiki.securifi.com/index.php/List_of_compatible_sensors_-_Almond%2B_2014

The accelerometer isn't supported yet?

Added to Wiki
Title: Re: Fibaro motion sensor support?
Post by: Chiqui1973 on April 11, 2016, 12:58:00 pm: I ordered 6 Fibaro Motion Sensors and they arrived with the 3.2V software, they are not working with Almond+ running R83, is there a firmare update on the way? Seems the ZWave Plus sensors are having issues with the current versión.
Title: Re: Fibaro motion sensor support?
Post by: Ashok on April 11, 2016, 02:14:17 pm: @ Chiqui1973,

So far, we don't have any known issues with the Fibaro Motion sensor, please do send us the log files and let us know, what exactly is the issue you are facing.
Title: Re: Fibaro motion sensor support?
Post by: Chiqui1973 on April 11, 2016, 05:27:03 pm: First I installed it as a multisensor but the motion sensor was not working, tried to do a re install but it gets stucked in the middle of the process, I have an older Fibaro sensor working fine. The temp and Lux seemed to work fine. Also tried to do a reset of the sensor but no luck so far and removed it a couple of times.

Regarding the log, i´m not sure how to extrac ti from the router but I can find out.
Title: Re: Fibaro motion sensor support?
Post by: Ashok on April 11, 2016, 07:04:07 pm: @ Chiqui1973,

You can send the logs through Almond+ touch screen, Help->Send logs.
Title: Re: Fibaro motion sensor support?
Post by: Chiqui1973 on April 14, 2016, 01:19:30 pm: Thanks for the tip, logs sent....
Title: Re: Fibaro motion sensor support?
Post by: andersos on January 10, 2017, 08:54:29 am: So with the recent firmware update, maybe the sensors list on the wiki should be added to. With the newer Fibaro motion sensor, does Almond+ now see the accelerometer of the motion sensor too?
Title: Re: Fibaro motion sensor support?
Post by: mastuder on February 03, 2017, 11:44:12 pm: I just got the Fibaro FGMS-001 and it connected once but will not connect again. The Almond+ says it found a sensor but does not connect and just times out. The Fibaro goes to blue and then the led goes off, I assume it times out also. And when it was connected the Almond+ would not read any information. Any suggestions?