Securifi Community Forum
Securifi Products => Almond+ => Topic started by: wstocker on November 01, 2016, 12:00:34 am
-
I just moved into a new home and am constantly fighting my internet situation. I have a bonded DSL system (2 lines into one modem to one IP). By default when using the provider (Frontier) supplied Modem / Router, my devices and services are not able to consistently work outside the home as they were double-NAT'd. The ISP does not technically have a bridge mode on their modem / router, but I was able to find out how to make it happen with a new detriment. I followed http://www.dslreports.com/forum/r29020150-DSL-Actiontec-FV2200-in-Bridge-mode-to-DD-WRT-router-Success (http://www.dslreports.com/forum/r29020150-DSL-Actiontec-FV2200-in-Bridge-mode-to-DD-WRT-router-Success) for the most part, but as we run OpenWRT and not DD-WRT, I can not find the required setting for step 15. Since this setting appears missing, I am only now able to get half of my bandwidth since I am only running on one line.
Please help!!
I am not sure which words to search for but everything I search for seems to be coming up empty. Paths that sound promising are linked below (but likely all missing):
- http://www.fw5.net/ (http://www.fw5.net/)
- https://lists.openwrt.org/pipermail/openwrt-devel/2012-November/017317.html (https://lists.openwrt.org/pipermail/openwrt-devel/2012-November/017317.html)
- https://wiki.openwrt.org/doc/howto/mwan3 (https://wiki.openwrt.org/doc/howto/mwan3)
- https://wiki.openwrt.org/doc/uci/multiwan (https://wiki.openwrt.org/doc/uci/multiwan)
:'(
-
Speed Tests still mostly come up low, but sometimes are giving better numbers. I connected directly to the modem with another PC, and it shows that connections on both lines are "up" and my connection status is listed as ADSL2+ADSL2 Bonded, so perhaps everything is working fine. This is a big adjustment coming from the slightly more bandwidth I was used to for the last 10 or so years. I hope a faster provider gets me connected soon!
-
Honestly, you are better off getting your own modem to go with the far superior router you already have. Otherwise I would set it up as a wired access point and if desired deactivate the wireless network on the ISP owned modem / router.