Securifi Community Forum
Securifi Products => Almond 3 => Topic started by: jackg234 on December 04, 2016, 12:22:31 pm
-
I have my Almond 3 set up as a range extender. The connected sensors work fine and can be monitored from my phone. However, I have a Grace Digital radio which connects and plays fine with the router for my DSL connection. to the internet. The Almond 3 is a range extender for this router. The Grace Digital Radio will not connect to the Almond 3 Range Connector. I have factory reset both the Almond 3 and the Grace Radio. Any other suggestions?
-
@ jackg234,
I have my Almond 3 set up as a range extender. The connected sensors work fine and can be monitored from my phone. However, I have a Grace Digital radio which connects and plays fine with the router for my DSL connection. to the internet. The Almond 3 is a range extender for this router. The Grace Digital Radio will not connect to the Almond 3 Range Connector. I have factory reset both the Almond 3 and the Grace Radio. Any other suggestions?
Try to disable the Range Extender and run the setup through Wireless WAN and let us know the status.
-
That did not work either. Still willing to try whatever you suggest.
-
@ jackg234,
Does it support 2.4 and 5 GHz or only 2.4 GHz and was this working with any other network before?
-
The Grace Digital Radio works fine when I connect via WiFi to the primary router for my DSL.
I believe the Grace Digital is only 2.4 Ghz but the specs only state the following:
True 802.11n wireless connectivity
Works with all 802.11b/g/n routers
Supports WPA Personal, WPA2-AES, and 64/128-bit WEP encryption Wi-Fi passwords
-
I solved the problem. I had to reconfigure the Almond 3 as a router. When that was done, the digital radio connected with it.