Choose style:

Author Topic: Danfoss Living Connect  (Read 17113 times)

0 Members and 1 Guest are viewing this topic.

Offline burnz

  • Backer
  • *
  • Posts: 41
  • Thanks: 0
  • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYears
Danfoss Living Connect
« on: August 25, 2014, 02:03:46 pm »
Hi,

i received my almond+ today in germany.
I tried to connect my danfoss living connect but the almond+ says it is not supported.
Could you please add support for them?

http://www.heating.danfoss.com/PCMPDF/Z_wave_commands_VDFNN202_teamcent.pdf


Offline cokeman

  • Peanut
  • **
  • Posts: 14
  • Thanks: 0
  • Registered : 25/07/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #1 on: August 25, 2014, 04:11:08 pm »
Hi

What version of Danfoss are you using, Lars said a+ supports the LC-13 edition, but not the old one (look under the battery cap if firmvare is 2.51 or below) you have the same issue that I have, and Lars and the tech team already have a dump from my setup.

The new LC-13, have a diffrent software and z-wave SDK (4.5) than the old one.

Lars said last week, that support would be soon... I hope hi is right. I'm trying to upgrade all my 14 Danfoss LC, as there is a big error in the software with the old one. Danfoss have said they will replace all my devices due to this error.

Offline burnz

  • Backer
  • *
  • Posts: 41
  • Thanks: 0
  • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #2 on: August 25, 2014, 05:29:10 pm »
It is the living connect z 014G0012 so this version should be z-wave capable and supported by third party like fibaro home center..

Offline cokeman

  • Peanut
  • **
  • Posts: 14
  • Thanks: 0
  • Registered : 25/07/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #3 on: August 26, 2014, 10:35:05 am »
Yep, but the Danfoss LC that the A+ team have is the new (last digits 13) I hope they get support one day.

But yes the 12 works somewhat with other controllers. I have a vera3, and they are not stable with connection.

LGNilsson

  • Guest
Re: Danfoss Living Connect
« Reply #4 on: August 26, 2014, 11:45:18 am »
I brought one back with me from Europe last month and I will chase again on this as I know quite a few of our European backers have these.

Offline Weasy

  • Backer
  • *
  • Posts: 6
  • Thanks: 0
  • Registered : 03/08/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #5 on: August 26, 2014, 06:59:31 pm »
I have one with a SW 3.02 firmware. Also seen as unsupported device.
Sent my log a few mins ago.

Offline burnz

  • Backer
  • *
  • Posts: 41
  • Thanks: 0
  • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #6 on: August 28, 2014, 09:47:11 am »
How do i collect the needed logs?

LGNilsson

  • Guest
Re: Danfoss Living Connect
« Reply #7 on: August 29, 2014, 02:23:18 pm »
Add the sensor, Help, Send Logs, type in a description, send.

Offline DMailMan

  • Backer
  • *
  • Posts: 1
  • Thanks: 0
  • Registered : 31/08/2014
    YearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #8 on: September 01, 2014, 08:57:12 am »
I wish I had checked here first, but I just bought one of these last week and now discover it's unsupported, so clearly I am interested in when support will be available too. Mine is an LC13 I think (at least it was sold as such), but the battery compartment isn't very clear as to which firmware version it might have. One part says 'living connect Z SW 1.01' which I hope is not the firmware version if others have versions numbered 2 or 3 or more. The website I bought it from reckons it should be based on Z-Wave SDK v4.5.

I can send in logs too if it would help, and am happy to help with testing etc if that would help speed things up.

Offline xAPPO

  • Backer
  • *
  • Posts: 3
  • Thanks: 0
  • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #9 on: September 01, 2014, 10:35:48 am »
I have around a dozen Danfoss valves - mixed v12 and v13 ..   Both appear as unsupported in firmware RO65 .   Just to add another request for support for these sensors / TRV's


Offline André

  • Kickstarter Developer
  • *
  • Posts: 50
  • Thanks: 0
  • Registered : 25/07/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #10 on: September 12, 2014, 02:39:11 am »
I´d also like to sign up for the Danfoss Living Connect Z requester list.
I´ve got 3 old firmware thermostats (Model 014G0012, firmware 2.51, Z-Wave Commands and Classes can be found here: http://www.heating.danfoss.com/PCMPDF/Z_wave_commands_VDFNN202_teamcent.pdf)

Offline André

  • Kickstarter Developer
  • *
  • Posts: 50
  • Thanks: 0
  • Registered : 25/07/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #11 on: September 12, 2014, 05:40:33 am »
Just to add: There is quite a bunch of different hardware and firmware revisions out there, a good overview is here
http://wiki.micasaverde.com/index.php/Danfoss_Thermostat_LC#HW_revisions

with the differences in Firmware explained here on page 4  http://heating.danfoss.com/PCMPDF/Danfoss%20Link_living_software-versions_VFIDC102.pdf

Note they released a brand new versoin in Jan 2014, thats the one with part no 014G0013 but I also found reports of devices with the old part -012 at the end that shipped with the 2014 1.00 Firmware...

Bottom line. I think securifi should focus on getting the 014G0012 to work, from the documents it looks like the -013 will work then as well.

LGNilsson

  • Guest
Re: Danfoss Living Connect
« Reply #12 on: September 12, 2014, 06:23:19 am »
It looks like we have the 1.00/014G0013 version, so let's hope that doesn't cause any problems getting support for the older ones.

Offline burnz

  • Backer
  • *
  • Posts: 41
  • Thanks: 0
  • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYears

Offline burnz

  • Backer
  • *
  • Posts: 41
  • Thanks: 0
  • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYears
Re: Danfoss Living Connect
« Reply #14 on: October 06, 2014, 09:51:31 am »
Any news about danfoss?

 

Page created in 0.096 seconds with 23 queries.

bottleneck