bottleneck
Choose style:

Author Topic: Tenvis IPROBOT3 Camera Remote Viewing  (Read 2317 times)

0 Members and 1 Guest are viewing this topic.

Offline Ambrialee

  • Newbie
  • Posts: 3
  • Thanks: 0
  • Registered : 30/01/2015
    YearsYearsYearsYears
Tenvis IPROBOT3 Camera Remote Viewing
« on: February 22, 2015, 06:36:45 pm »
I have the Tenvis IPROBOT3 Camera I am trying to set up with the Almond router to view remote on other computers.  I have the wireless up and running but cannot get it to where I can remotely see.  How can I set this up for remote viewing?

Offline Rahaman

  • Securifi Staff
  • *
  • Posts: 78
  • Thanks: 4
  • Registered : 11/01/2015
    YearsYearsYearsYears
Re: Tenvis IPROBOT3 Camera Remote Viewing
« Reply #1 on: February 23, 2015, 08:19:59 am »
I have the Tenvis IPROBOT3 Camera I am trying to set up with the Almond router to view remote on other computers.  I have the wireless up and running but cannot get it to where I can remotely see.  How can I set this up for remote viewing?

Put Tenvis IPROBOT3 Camera IP Address in DMZ, you can do it from DMZ App in LCD UI.
or
By Port forwarding you can do it, just add the rules in Local WEB UI. Use the Port no on which your camera is running and IP address of the Camera.
And access it with Almond WAN IP from WAN side, example:- Open browser write camera's IP and port such as http://192.168.x.x:8x(IP address:port no)
 
« Last Edit: February 23, 2015, 09:02:48 am by Rahaman »

 

Page created in 0.121 seconds with 21 queries.

bottleneck