Trigger Rules keep running

[chitechguy]

R70AS, confirmed similar behavior on R70.

The issue boils down to rules randomly re-running while in a trigger state, even though the state is unchanged.

Door open (Securifi door sensor) should cause a light (GE Link) to blink once or twice. Instead, as long as the door is open, the light has it's own little disco party, blinking at random timing. If the door is left open, it will blink all through the night.

Keyfob also has similar issues (if there are any time-based rules, like a manually programmed fade, tied to a keyfob state, they will randomly re-run).

It makes these rules unusuable.

First, I'd really like to request a "Toggle State" feature on lights. I want to be able to toggle all lights with the same button on a keyfob.  Or if I want light notification of an open door, I don't want to program 2 different rules based on whether the light is currently on or not.

I'd also request turning off the animation on the rule editing menu. Hitting the "Confirm Selection" on rule state is annoying, especially when it takes you to the top of the page. Why would I want to go back to the top of the page? I have no business at the top of the page. Why do I even have to hit confirm selection? Can't you make the Save button do that too? (It's like 5 minutes of javascript work to hack that into shape).

Code: [Select]

Router
Sensors
Rules
Advanced
Keyfob off it
KeyFob #1
DISARM ALL
DiningLampTop
OFF
LivRmLampTop
OFF
Temp lights on in rear porch
2FRear
OPEN
RearPorch
OFF
RearPorch
ON
RearPorch
99%
RearPorch
WAIT180SECONDS
OFF
Front Lights on
Front2F
OPEN
FrontHall
OFF
FrontHall
ON
FrontHall
WAIT180SECONDS
OFF
Turn on lamps
KeyFob #1
ARM ALL
DiningLampTop
ON
LivRmLampTop
ON
First Floor Entry
2F First Floor Front
OPEN
FrontHall
ON
FrontHall
WAIT300SECONDS
OFF
Rear Porch Entry
Rear Porch Entry
OPEN
RearPorch
ON
RearPorch
WAIT300SECONDS
OFF
Front Entry Alert (Lights Off)
DiningLampTop
OFF
2F First Floor Front
OPEN
LivRmLampTop
ON
LivRmLampTop
WAIT1SECONDS
OFF
LivRmLampTop
WAIT1SECONDS
ON
LivRmLampTop
WAIT1SECONDS
OFF
Front entry alert (Light On)
LivRmLampTop
ON
2F First Floor Front
OPEN
LivRmLampTop
OFF
LivRmLampTop
WAIT1SECONDS
ON
LivRmLampTop
WAIT1SECONDS
OFF
LivRmLampTop
WAIT1SECONDS
ON
Rear Entry Alert (Light Off)
DiningLampTop
OFF
Rear Porch Entry
OPEN
DiningLampTop
ON
DiningLampTop
WAIT1SECONDS
OFF
DiningLampTop
WAIT1SECONDS
ON
DiningLampTop
WAIT1SECONDS
OFF
Rear Entry Alert Light ON
DiningLampTop
ON
Rear Porch Entry
OPEN
DiningLampTop
OFF
DiningLampTop
WAIT1SECONDS
ON
DiningLampTop
WAIT1SECONDS
OFF
DiningLampTop
WAIT1SECONDS
ON
Turn All Off
Bedroom (No Chain)
DISARM ALL
DiningLampTop
OFF
LivRmLampTop
OFF
FrontHall
OFF
RearPorch
OFF
All Lights On
Bedroom (No Chain)
ARM ALL
DiningLampTop
ON
LivRmLampTop
ON
FrontHall
ON
RearPorch
ON
Click to add a new rule
© 2014 Securifi. All rights reserved.
Site best viewed in Modern Browsers (IE9+, Firefox 25+, Chrome 25+) at 1024 x 768 pixels resolution.


[LGNilsson]

The rules have changed quite a bit in the next firmware, so please hold on for that. I can't promise it'll address your issues, but it works a lot better than the rules in R070as. The new firmware should be released this week.