Choose style:

Author Topic: 'Please refresh and retry' on all devices since r70as  (Read 2725 times)

0 Members and 1 Guest are viewing this topic.

Offline flyingvette

  • Acorn
  • *
  • Posts: 5
  • Thanks: 0
  • Registered : 21/02/2015
    YearsYearsYearsYearsYears
'Please refresh and retry' on all devices since r70as
« on: April 13, 2015, 09:49:36 pm »
Anyone else had this issue?  Basically lost all functionality on devices.  Is there a way to refresh / reload that part of the interface without having to re-add all devices?  Hoping to avoid having to physically re-add them all.

Offline Ohiomedic

  • Backer
  • *
  • Posts: 446
  • Thanks: 0
  • Registered : 27/05/2014
    YearsYearsYearsYearsYearsYears
Re: 'Please refresh and retry' on all devices since r70as
« Reply #1 on: April 13, 2015, 10:46:11 pm »
Even if you reset the router by holding the reset button for 10 seconds you won't loose the devices or rules. All the other router settings will be reset though. I have had to do this before.

Offline rldreams

  • Beta Testers
  • *
  • Posts: 240
  • Thanks: 0
  • Registered : 02/06/2014
    YearsYearsYearsYearsYearsYears
Re: 'Please refresh and retry' on all devices since r70as
« Reply #2 on: April 15, 2015, 11:00:45 pm »
Maybe I will try that 10 sec. hard reset. I have been just dealing with A+ not reading the proper state of 1/2 my lights, simply because they are such a PIA to reset. I have been putting off going around and collecting them all, resetting each one then re-adding it. The nice weather is finally here and I have too much to do outside to spend an afternoon arguing with light bulbs that don't want to reset.

Offline flyingvette

  • Acorn
  • *
  • Posts: 5
  • Thanks: 0
  • Registered : 21/02/2015
    YearsYearsYearsYearsYears
Re: 'Please refresh and retry' on all devices since r70as
« Reply #3 on: April 16, 2015, 02:25:01 am »
I'll give that a shot when I can write down all my network settings.

Every time I flash a new update now I also get huge amounts of 'resolving host' errors on my hardwired pcs.  Also annoying.

Offline flyingvette

  • Acorn
  • *
  • Posts: 5
  • Thanks: 0
  • Registered : 21/02/2015
    YearsYearsYearsYearsYears
Re: 'Please refresh and retry' on all devices since r70as
« Reply #4 on: April 23, 2015, 10:22:21 pm »
So the reset ended up working.... up until I went to go change the timezone via openWRT.  Nuked all the sensors again.

Ugh. Ugh.

LGNilsson

  • Guest
Re: 'Please refresh and retry' on all devices since r70as
« Reply #5 on: April 23, 2015, 11:19:09 pm »
Can you please go to Help, Send Logs in the LCD UI and send us logs when this is happening so we can look into what's going on, as this is clearly not normal behaviour and it's not something we've come across.

Offline flyingvette

  • Acorn
  • *
  • Posts: 5
  • Thanks: 0
  • Registered : 21/02/2015
    YearsYearsYearsYearsYears
Re: 'Please refresh and retry' on all devices since r70as
« Reply #6 on: April 24, 2015, 03:03:31 am »
Ok, log sent.

Offline flyingvette

  • Acorn
  • *
  • Posts: 5
  • Thanks: 0
  • Registered : 21/02/2015
    YearsYearsYearsYearsYears
Re: 'Please refresh and retry' on all devices since r70as
« Reply #7 on: April 26, 2015, 06:46:31 pm »
I realized last night that the rules can still access the sensors.  I can't use the webUI to switch on or off or monitor any of the sensors.  But the rule setup on a timer works on the light it's attached to.  But only since I reverted the timezone back to default in openwrt.

 

Page created in 0.056 seconds with 22 queries.