Choose style:
« previous next »
Pages: [1]   Go Down

Author Topic: DMZ  (Read 4886 times)

0 Members and 1 Guest are viewing this topic.

Offline ggaspari

  • Newbie
  • Posts: 1
  • Thanks: 0
    • Registered : 14/07/2015
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYears
DMZ
« on: July 14, 2015, 10:10:56 am »
Hi guys,

I'm trying to set up a DMZ so I can access my PC from outside on ports 8080, 8081 and 9091
So far I did this



This should work, but I cannot access it - Says "can't connect"

What else should I do? I was using a tomato based firmware and am new to OpenWRT
Logged

Offline fillibar

  • Backer
  • *
  • Posts: 2060
  • Thanks: 4
    • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: DMZ
« Reply #1 on: July 14, 2015, 10:21:55 am »
Is the DNS ready for accessing your network? Obviously going to that IP would not work.

Did you try port forwarding? I use that when I only need a few ports and that works fine. DMZ opens up everything to the target.
Logged
Almond 3 mesh handling the home.

Offline kbtn

  • Newbie
  • **
  • Posts: 19
  • Thanks: 0
    • Registered : 05/04/2015
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: DMZ
« Reply #2 on: July 14, 2015, 03:11:18 pm »
You can use a DDNS service and/or utilize port forwarding and still maintain some security to your network. 
Logged

Offline Fire69

  • Backer
  • *
  • Posts: 344
  • Thanks: 0
    • Registered : 03/08/2013
    YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: DMZ
« Reply #3 on: July 14, 2015, 03:57:25 pm »
I would recommend DMZ either if you just want to access your pc from the outside.  You are creating a huge risk that way.
Just check what ports you need and then set up port forwarding.
And a DDNS is also nice in that case :)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.031 seconds with 17 queries.