Please someone help me. I have this switch installed in my garage to turn my pool pump on and off. My A+ seems to lose connectivity with the switch, which results in the rules not activating. I have paired, un-paired, re-paired this device a number of times, which is successful each time however, over time the same result occurs. I have a Linear WD500Z switch installed in the same area of the garageand I have the same issues with it losing connectivity. That switch is connected to a security light however, and remains on. I don't have rules for it, so I'm not as concerned. But the FS20Z I need it's rules to activate. It isn't a distance issue because I am using a Aeon Labs power monitoring plug in Appliance Switch in my shed, which is further away. It never loses connectivity and the response time is very quick. Please tell me why I have issues only with the Linear devices. Well, I do have connectivity issues with my Schlage plug in Lamp switches, but I really need help with the FS20Z!
Specifications:
Maximum Load:
Isolated Contacts: 20 amps G.P. maximum, 277 VAC, 10FLA, 60LRA, 250VAC
Motor: 1 H.P. maximum, 120/240 VAC
Incandescent: TV8 (Tungsten), 120 VAC, 960W maximum
Signal (Frequency): 908.42 MHz
J-Box mounted
Dry or wet contact applications
Range: Up to 100 feet line of sight between the controller and/or the closest Z-Wave device
Input: 120 VAC, 50/60 Hz
Z-Wave Version 4.55
Network wide inclusion
Scene: Command Class
Security beaming
Isolated Relay Output up to 277v