bottleneck
Choose style:

Author Topic: Xiaomi AQARA economic zigbee  (Read 1072 times)

0 Members and 1 Guest are viewing this topic.

Offline Agustin

  • Newbie
  • Posts: 3
  • Thanks: 0
  • Registered : 25/02/2017
    YearsYears
Xiaomi AQARA economic zigbee
« on: February 27, 2017, 12:47:27 pm »
It would be fantastic to find this xaomi aqara device as a wall switch recognized by the almond +, is economical, reliable and a good design, I think these series of devices would be suitable for almod +.

Any idea how to recognize it ??



Saludos

Offline fillibar

  • Backer
  • *
  • Posts: 2039
  • Thanks: 4
  • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYears
Re: Xiaomi AQARA economic zigbee
« Reply #1 on: February 27, 2017, 02:13:41 pm »
If you have one and it is not recognized but CAN be added... The best way to try to get support added is to add the device, and then push the logs with a descriptive message. Posting here after the log, with the log's name would not hurt. That way Securifi has logs that show what the device says it is and can do, so they can eventually add support.

If it does not add... That is a bigger problem.
Almond 3 mesh handling the home.

Offline Agustin

  • Newbie
  • Posts: 3
  • Thanks: 0
  • Registered : 25/02/2017
    YearsYears
Re: Xiaomi AQARA economic zigbee
« Reply #2 on: February 28, 2017, 05:51:37 am »
Greetings, connects .. and recognizes it, but indicates that it is not supported.
Could you tell me where the LOG is to be able to send it? I'm not clear if you find the LOG KERNEL


devfn=0, where=12, bus->number=3
Reading Flash for Calibraton data from 0x1000 and partition name is cal
SPECTRAL : get_capability not registered
HAL_CAP_PHYDIAG : Capable
SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231)
SPECTRAL : get_capability not registered
HAL_CAP_RADAR   : Capable
SPECTRAL : Need to fix the capablity check for SPECTRAL
 (spectral_attach : 236)
SPECTRAL : get_capability not registered
HAL_CAP_SPECTRAL_SCAN : Capable
SPECTRAL : get_tsf64 not registered
spectral_init_netlink 52 NULL SKB
SPECTRAL : No ADVANCED SPECTRAL SUPPORT
SPECTRAL :----- module attached
Green-AP : Green-AP : Attached
[/i]


Best regards

Offline fillibar

  • Backer
  • *
  • Posts: 2039
  • Thanks: 4
  • Registered : 02/08/2013
    YearsYearsYearsYearsYearsYears
Re: Xiaomi AQARA economic zigbee
« Reply #3 on: February 28, 2017, 09:54:59 am »
The easiest way is in the app. Go to the WiFi tab and scroll down Send Logs.

On the LCD (going from memory here) you flip to the last screen of icons, select Diagnostics, then Send Logs. I think...
Almond 3 mesh handling the home.

 

Page created in 0.04 seconds with 20 queries.

bottleneck