Choose style:

Author Topic: A3 Mesh connection change  (Read 1237 times)

0 Members and 1 Guest are viewing this topic.

Offline syshi

  • Newbie
  • *
  • Posts: 5
  • Thanks: 0
  • Registered : 26/01/2017
    YearsYearsYears
A3 Mesh connection change
« on: May 13, 2017, 05:45:59 am »
Currently my A3 is connected as below
Fiber > modem > A3(1) > A3(2) & A3(1) > A3(3)
A3(1) to A3(2) & A3(3) through wireless. All mesh connection.
A3(1) to A3(3) is too weak, some barrier preventing the signal. Many times it dropped and showed as no connection or weak connection.

How can I change the connection if A3(3) to tap from A3(2) instead? Cause A3(2) is nearer and the intermediate connection.

Thanks for the advice

Offline Ashok

  • Securifi Staff
  • *
  • Posts: 2767
  • Thanks: 3
  • Registered : 25/07/2014
    YearsYearsYearsYearsYearsYears
Re: A3 Mesh connection change
« Reply #1 on: May 13, 2017, 09:58:52 am »
@ syshi,
Currently my A3 is connected as below
Fiber > modem > A3(1) > A3(2) & A3(1) > A3(3)
A3(1) to A3(2) & A3(3) through wireless. All mesh connection.
A3(1) to A3(3) is too weak, some barrier preventing the signal. Many times it dropped and showed as no connection or weak connection.

How can I change the connection if A3(3) to tap from A3(2) instead? Cause A3(2) is nearer and the intermediate connection.

Thanks for the advice

Tap on Add Almond-->Check Wi-Fi status--> and remove the A3 (3) and then move it closer to A3(2) and try adding it back, that should do it.

 

Page created in 0.121 seconds with 21 queries.