Many of us having been experimenting with AEON 4 in 1 devices.
This is my experience...(so far)
Most problems appear to stem from firmware (both MCV and AEON).
If you haven't updated AEON firmware AND using v622 MiOS then you can expect trouble with results.
Motion detection is good, with triggering as expected.
Temp, Lux and Humidity depends greatly on Polling, which depends on whether the device is Battery Powered or utilises an exterior source. These parameters can be altered to suit.
Interior is Gas Ducted Heating, this is controlled by a ZTS100 Device.
It's stand alone and requires no input from Vera.